Tam &Toby do Europe ...Take two (1 Viewer)

[busby]

In other news today I was making my fridge vents ......got them built and fitted in the frame ..ill wire them up tomorrow

Are they meant to suck cold air in or the hot air out? View attachment 415136

Mine are on my top vent and suck air out,,work well,,BUSBY.

 

[Northernraider]

Mine are on my top vent and suck air out,,work well,,BUSBY.

Aye thats my top fridge vent ..i did think they were meant to suck heat out just thought I'd check

 

[busby]

Aye thats my top fridge vent ..i did think they were meant to suck heat out just thought I'd check

I only have one fan but it really works well.BUSBY.

 

[Just smiffy]

It all depends wether you like a sucker or blower.....

 

[tonyidle]

Are you replacing that horrible stuff covering the gas locker ? If do what with, carpet.

I removed mine & simply cleaned the GRP. Looked OK to me.

^{_{Subscribers  do not see these advertisements}}

 

[Scotch mist]

Are the fans fitted the wrong way in your picture , the fans I have used would have been the other way round

 

[Northernraider]

Are the fans fitted the wrong way in your picture , the fans I have used would have been the other way round

Its possible

 

[Figaro]

.ill wire them up tomorrow

Make sure you get polarity correct first time or they'll be toast

 

[Scotch mist]

Had a look at my thermostatic extractor hood I’ve just finished Making , pictures attached, it’s extracting through the face with the controller fitted

my thermostatic fridge vent fans I did also extract the same direction

 

[Northernraider]

Had a look at my thermostatic extractor hood I’ve just finished Making , pictures attached, it’s extracting through the face with the controller fitted

my thermostatic fridge vent fans I did also extract the same direction

View attachment 415236View attachment 415237

Any idea which of the wires is positive and negative lol as I have 3 wires on each with sod all to identify them

^{_{Subscribers  do not see these advertisements}}

 

[Lenny HB]

Any idea which of the wires is positive and negative lol as I have 3 wires on each with sod all to identify them

What colours are they?
If red, black & yellow, Black is Negative & Red +12v, Yellow is the sensor for speed control in computers.

 

[Northernraider]

What colours are they?
If red, black & yellow, Black is Negative & Red +12v, Yellow is the sensor for speed control in computers.

Oh come on

I'm not that bad lol

As far as I can see they are all black lol
One may be grey ill have to recheck

I'm just heading home from dog walk so ill be starting on it soon


Got a guy coming to steam clean my cab seats today also

 

[Lenny HB]

Oh come on

I'm not that bad lol

As far as I can see they are all black lol
One may be grey ill have to recheck

I'm just heading home from dog walk so ill be starting on it soon


Got a guy coming to steam clean my cab seats today also

Take your sunglasses off.
I've never seen a computer fan where the wires are not colour coded, you should have bought some decent fans, cheap ones are noisy & don't shift enough air.

 

[Northernraider]

Take your sunglasses off.
I've never seen a computer fan where the wires are not colour coded, you should have bought some decent fans, cheap ones are noisy & don't shift enough air.

2 black and one black with grey bits

 

[Lenny HB]

2 black and one black with grey bits

Tough, talk to your supplier it ain't normal.

^{_{Subscribers  do not see these advertisements}}

 

[Northernraider]

Tough, talk to your supplier it ain't normal.

Scotch mist photo above his are all black too lol

I'll have to do the old trial and error method

Usually just results in the fan going backwards if wrong way round

 

[tonyidle]

Usually just results in the fan going backwards if wrong way round

Not with that type of motor. They're brushless with clever electronics. They do give an indication of reverse polarity by not spinning. Then smoking. You need to know more before connecting them.

 

[Podney]

Tough, talk to your supplier it ain't normal.

I didn’t know Tam spoke mandarin.

 

[Northernraider]

Not with that type of motor. They're brushless with clever electronics. They do give an indication of reverse polarity by not spinning. Then smoking. You need to know more before connecting them.

Okay

This is on the back of the fan

Going by that I'd be inclined to think the wire furthest away from the black and grey is the positive and the middle is the negative

I'll try that and if they blow up ill just have to buy others lol

They weren't expensive

 

[Scotch mist]

My wires are 2 black & one black with a white tracer

picture added should help

^{_{Subscribers  do not see these advertisements}}

 

[Scotch mist]

Okay

This is on the back of the fanView attachment 415312

Going by that I'd be inclined to think the wire furthest away from the black and grey is the positive and the middle is the negative

I'll try that and if they blow up ill just have to buy others lol

They weren't expensive

slow down man , help is already here

 

[Northernraider]

slow down man , help is already here

Cool ....ive got the + and - the wrong way then

Will have to change it Hope its right

 

[Northernraider]

Jobs a good un all wired up and working fine ....

 

[Northernraider]

The guy cleaning cabseats is doing a great job.

Heres the before pics

And the one done one not

Still a few wee bits he's going to go over again but what a difference so far

 

[Val 3 dogs]

10 out of 10 for perseverance Tam, you should now treat yourself to a really sickly sweet cream cake.

^{_{Subscribers  do not see these advertisements}}

 

[Val 3 dogs]

Is that Toby all complete and perfect once you put his seats back in?
All set for his next big adventure and to receive the queues of misguided dolly birds foolishly flocking to his door?

 

[Just smiffy]

The guy cleaning cabseats is doing a great job.

Heres the before pics
View attachment 415329View attachment 415330


And the one done one not

View attachment 415331View attachment 415333

Still a few wee bits he's going to go over again but what a difference so far

Is this a trick question...?

 

[Lenny HB]

Jobs a good un all wired up and working fine ....

What temperature controller did you use?

 

[Podney]

The guy cleaning cabseats is doing a great job.

Heres the before pics
View attachment 415329View attachment 415330


And the one done one not

View attachment 415331View attachment 415333

Still a few wee bits he's going to go over again but what a difference so far

“wee bits”.....at your age you surely don’t dribble yet?!

Oh! It’s a language thing I guess.

 

[Northernraider]

Is that Toby all complete and perfect once you put his seats back in?
All set for his next big adventure and to receive the queues of misguided dolly birds foolishly flocking to his door?

Well nearly ....there are a few little jobs still to do but thats just me being fussy

^{_{Subscribers  do not see these advertisements}}