nsxfan
Free Member
Hi all,
first post so please be gentle!
I have an intermittent fault on my Burstner Elegance. I can get no water through any of the taps when turned on, although it may spring to life if we forget and leave on of the taps open.
I have checked everything I can think of. 12v on, water pump on, pump fuse checked, fresh water tank full, all drains closed. Microswitch on taps sounds to be working, but no pump noise at all.
The manual suggests vigorously shaking the pump in case it is an air block. No effect.
Any ideas?
Thanks
first post so please be gentle!
I have an intermittent fault on my Burstner Elegance. I can get no water through any of the taps when turned on, although it may spring to life if we forget and leave on of the taps open.
I have checked everything I can think of. 12v on, water pump on, pump fuse checked, fresh water tank full, all drains closed. Microswitch on taps sounds to be working, but no pump noise at all.
The manual suggests vigorously shaking the pump in case it is an air block. No effect.
Any ideas?
Thanks