Touchwood
Free Member
- Aug 23, 2011
- 772
- 733
- Funster No
- 17,874
- MH
- Compass Avantgarde 140
- Exp
- 5 years and learning
Currently on site at Cote Ghyll nr. Osmotherly, on EHU.
MH has panel with meter and 3 switches - Pump off/on on left, aux/veh switch on right, centre switch is normally up, marked water, can be held down. Meter has two scales, one Empty to Full (obviously water) the other volts. I've assumed meter reads water tank level and when switch held down reads battery voltage - previously always been around 12v. or so.
Never been really sure what aux/veh switch does, I guess it prioritises which battery gets charged by engine/mains charger?
Anyway - after over 24 hours on EHU idly flipped the switch to see battery condition - reads zero whether aux or veh selected. Tried disconnecting EHU, seems to be plenty life in both aux and veh battery, but meter still reads zero.
No major prob at the moment but I hate not knowing what's going on - can anyone throw any light on this?
MH has panel with meter and 3 switches - Pump off/on on left, aux/veh switch on right, centre switch is normally up, marked water, can be held down. Meter has two scales, one Empty to Full (obviously water) the other volts. I've assumed meter reads water tank level and when switch held down reads battery voltage - previously always been around 12v. or so.
Never been really sure what aux/veh switch does, I guess it prioritises which battery gets charged by engine/mains charger?
Anyway - after over 24 hours on EHU idly flipped the switch to see battery condition - reads zero whether aux or veh selected. Tried disconnecting EHU, seems to be plenty life in both aux and veh battery, but meter still reads zero.
No major prob at the moment but I hate not knowing what's going on - can anyone throw any light on this?