Victron 12/12/30

[Platelet]

I’ve just got this B2B and I am struggling even at the setup stage. I have a wet lead acid leisure battery but I can’t find any options for this via the victronconnect app. Am I missing something or does this not support these types?

 

[Swifter]

Try settings , battery , battery pre set.

 

[Platelet]

I’ve tried that, it comes up with different types/makes but no wet ones.

 

[Two on Tour]

In the app have you changed your Orion from "power supply" to "charger" which it needs to be in before you can configure the battery type.

 

[Two on Tour]

Here's a thread from a few weeks back with the same problem that is worth a read through.

Vicron B2B set up problems, HELP required

Put this down to old age but I have fitted a Vicron non isolated unit with no problems but try as I might I cannot set up the values in the app, I need to set to Lead acid but no option is shown, Do I have to put in the maximum amps of the batteries, (how?). I have asked the supplier and...

www.motorhomefun.co.uk

^{_{Subscribers  do not see these advertisements}}

 

[Tombola]

your battery manufacturer will have settings advertised for your battery, but these will probably suffice
Absorption voltage: 14.6V
Float voltage: 13.8V
Storage voltage: 13.2V

if it asks for automatic absorbtion then yes

The gel1 can usually do too

 

[footscray188c]

Gel battery setting