Trouble with inverter (1 Viewer)

[DeanandVic]

Hi, just recently upgraded to a Knauss Ti700 which has an inverter set up, prewired to all points and control switch inside. We have just headed over to Europe and have attempted to use it once where it seemed ok, although I had to reboot it 3 times. Now when I turn it on, it powers up for about 20 seconds then the panel lights start flashing and no power? It's a Buttner Electronik system. I don't have a manual and online is in German. Must be something simple maybe? I'm not sure and hopefully someone has some idea?

 

[DavidG58]

do you have any read out of leisure battery voltage? It would sound like a low battery voltage issue to me

 

[DeanandVic]

Currently showing 13V each so doesn't appear to be. The unit is switching on and off about every 20 seconds at the moment, that is when I switch it on to try it.

^{_{Subscribers  do not see these advertisements}}

 

[DavidG58]

when you switch it on does the voltage change at all?

 

[canopus]

Is your van a Frankia?
You could try contacting Buttner direct Büttner Elektronik Service-Hotline
+49 (0) 5973 - 900370

 

[DeanandVic]

Yes, from 12.9 to 12.8

^{_{Subscribers  do not see these advertisements}}

 

[DeanandVic]

No it's a Knauss

 

[canopus]

Sorry just re-read your original post

 

[DeanandVic]

But Thanks for the info I can try calling them tomorrow

^{_{Subscribers  do not see these advertisements}}

 

[DavidG58]

Yes, from 12.9 to 12.8

sorry thats me out, I have peaked

it will hopefully be something simple

 

[DeanandVic]

Cheers mate

 

[DeanandVic]

Hi Canopus, I spoke to the service guy and received instruction to hold down the button for 3 secs to take it off automatic mode, fixed it, simple. Thanks for your heads up on the number.

^{_{Subscribers  do not see these advertisements}}