Removing instrument cluster from 2014 Peugeot boxer (1 Viewer)

[paulj]

i have taken the 2 screws out from either side of the cluster ,it moves forward a little bit but can’t get the cowl over the cluster to come off,anybody any ideas how to remove it?

 

[dave newell]

Pull up at the rear of the cover panel then slide towards you. Two t25 torx screws then hold the cluster in place. If you disconnect the cluster DO NOT turn the ignition on while it is disconnected.

D.

 

[paulj]

Thanks for the advice will give this a go in the morning.

 

[paulj]

Dave thanks for the info got it out ok this morning,is there anything I should be aware of when I reinstall it as you mentioned not to turn on the ignition when the cluster was out
Thanks in advance

 

[paulj]

Had the instrument cluster repaired at cartronix in Waterlooville and it was returned yesterday,refitted and all is working well,thanks for the advice Dave Newell

^{_{Subscribers  do not see these advertisements}}

 

[MikeD]

Dave is a top guy.