Dipstick Stuck! (1 Viewer)

[Larby]

Hi All,
Thank you all that suggested 'Bent Pipe'!
Having removed lots of Engine stuff top side I got my Borescope to get this shot:
View attachment 313752
Now it is not quite like it looks as the kink was not caused by pipe shown.
There's a bracket that holds the sheath in place and some 'Dipstick' put it on the wrong way round and crushed the pipe:
View attachment 313750

Having got no joy from Fiat I thought I'd get the Sheath out. I did make a vid of it with Hero Cam but it's crap as the sun is shining through bay and you see n hear nowt!.

So, with a bit of Heat and controlled easing out of the kink - All is well.

I am with fully operational Dipstick IN / OUT smooth as American Pie.

I hope you all enjoyed the Kinky Dipstick Sheath Saga.

Thanks for all your help

 

[pappajohn]

So the oil level hasn't been checked since the 'dipstick' refitted the bracket.....

 

[Pausim]

Not sure I should be looking at a picture of a Kinky Sheath.

^{_{Subscribers  do not see these advertisements}}

 

[Paul and Kate]

Hi All,
Thank you all that suggested 'Bent Pipe'!
Having removed lots of Engine stuff top side I got my Borescope to get this shot:
View attachment 313752
Now it is not quite like it looks as the kink was not caused by pipe shown.
There's a bracket that holds the sheath in place and some 'Dipstick' put it on the wrong way round and crushed the pipe:
View attachment 313750

Having got no joy from Fiat I thought I'd get the Sheath out. I did make a vid of it with Hero Cam but it's crap as the sun is shining through bay and you see n hear nowt!.

So, with a bit of Heat and controlled easing out of the kink - All is well.

I am with fully operational Dipstick IN / OUT smooth as American Pie.

I hope you all enjoyed the Kinky Dipstick Sheath Saga.

Thanks for all your help

Yay
Was it roughly 11inches down ????

 

[Calamaster]

Hi All,
Thanks for the

So the oil level hasn't been checked since the 'dipstick' refitted the bracket.....

That is a very GOOD point! Luckily I did my Maths on this. When I did the service 2018 I put in 6 Litres. I did have a tiny Sump leak (now fixed).
Did 2500 Miles 2018 to Service YESTERDAY.
I measured the Oil Dump inc. Filter and it came to 5.9Litres.
Now with Dipstick and full oil load 6 litres it is about 1cm less than MAX on Dipstick.....
So, all looking good.
If your Dipstick is stuck then just look up Oil Capacity and put that in and you should be good to go... unless you are leaking oil big time and then it's a bit of guesswork.
Make sure you don't OVERFILL if you're 'topping up' with no dipstick!

 

[Calamaster]

Yay
Was it roughly 11inches down ????

My Dipstick penetrated fully, but on withdrawl the sheath demanded I stop 11 inches from full withdrawl. It was like it was not satisfied with my constant pushing and pulling, and needed to grip me in for more!

^{_{Subscribers  do not see these advertisements}}

 

[Calamaster]

Hi All,
I now have another PROBLEM!
'Pissing Water'...
Please Admin advise if I should start a new thread on this subject?

 

[TheBig1]

Hi All,
I now have another PROBLEM!
'Pissing Water'...
Please Admin advise if I should start a new thread on this subject?

It is normal etiquette to start a new thread for a different query as it makes the question and replies more searchable for visitors

 

[TheBig1]

Hi All,
I now have another PROBLEM!
'Pissing Water'...
Please Admin advise if I should start a new thread on this subject?

oh and given the average age on here, pissing is a frequent occurrence

^{_{Subscribers  do not see these advertisements}}

 

[TheBig1]

Hi All,
I now have another PROBLEM!
'Pissing Water'...
Please Admin advise if I should start a new thread on this subject?

oh and given the average age on here, pissing is a frequent occurrence

 

[Calamaster]

Thanks Big1,
I will gather the information and start a New Post...
This is going to be as funny as this one I thinks!

 

[Calamaster]

It is just that when doing my Dipstick Stuff I found a real 'Bodge Job' on a part 'fix' more to follow in new POST

^{_{Subscribers  do not see these advertisements}}

 

[Paul and Kate]

oh and given the average age on here, pissing is a frequent occurrence

And forgetting what they said a few minutes before?

 

[Jimbohorlicks]

It is just that when doing my Dipstick Stuff I found a real 'Bodge Job' on a part 'fix' more to follow in new POST

Oh no, not another one

 

[Deneb]

Gosh, this thread need only have been less than one page long if you'd taken the initial advice to remove the dipstick tube!

Wouldn't have been half as entertaining though

^{_{Subscribers  do not see these advertisements}}

 

[Bart]

And forgetting what they said a few minutes before?

Come again???

 

[davejen]

Half past ten....
glad you sorted the problem. It was a good read.
Cheers, Dave

 

[maison]

Just read this thread in one go.

I’m going for a lie down now!




Seriously, glad you got it sorted.

^{_{Subscribers  do not see these advertisements}}

 

[hilldweller]

oh and given the average age on here, pissing is a frequent occurrence

And double posting.



And double posting.

 

[TheBig1]

And double posting.



And double posting.

in case you didn't hear it the first time deaf old bugger

 

[peterc10]

Come again???

Not at my age ........................

^{_{Subscribers  do not see these advertisements}}