Weigh Bridge

ES Cumbrian

Free Member
Joined
Oct 10, 2014
Posts
321
Likes collected
143
Location
Cumbria
Funster No
33,773
MH
Autotrail
Exp
3 years
Looking for a Weigh Bridge near Kendal Cumbria to check my Autotrail Apache 634L don't mind paying but must have easy access.
 
https://www.eden.gov.uk/content-searcher?q=weighbridge

Below are the names, addresses and contact details for public weighbridges in the county.

You are strongly advised to contact the weighbridge operator in advance to check that the weighbridge is in operation.

Name & Address

Telephone

Nearest ‘A ‘road

Hanson Aggregates

Shap Beck Quarry, Shap, Penrith

CA10 2NX



01931 717200

A6

Innovia Films Ltd

Station Road, Wigton

CA7 9BG



016973 42281

A596

A W Jenkinson Forest Products

Clifton Moor, Clifton, Penrith

CA10 2EY



01931 712644

A6

A W Jenkinson

Haweswater Road

Penrith Industrial Estate, Penrith

CA11



01768 891660

A6

Dent Logistics

Barbary Plains

Edenhall

Penrith CA11 8SR



01768 862396

A6



Sinkfall Recycling

Sinkfall Farm

Rakesmoor Lane

Barrow in Furness LA14 4QE



01229 587281

A590

SITA Lancashire Ltd

Underbarrow Quarry

Boundary Bank Lane, Kendal



01539 730622

A591

Ed Weetman (NW) Ltd

Plot 16 Kirkbride Airport

Kirkbride, Wigton



016973 51986

A596

(B5307)

H Wicks Ltd

Scarth Road

Sowerby Woods Industrial Estate

Barrow in Furness LA14 4RF

01229 432114

A590
 
www.gov.uk find a weighbridge

I put my postcode in and it gives you your nearest weighbridges and contact numbers.

My local one is at an animal feed manufacturer and just turn up pay £15 and get a printout. Before we moved we used a scrap metal yard.

Subscribers  do not see these advertisements

 
www.gov.uk find a weighbridge

I put my postcode in and it gives you your nearest weighbridges and contact numbers.

My local one is at an animal feed manufacturer and just turn up pay £15 and get a printout. Before we moved we used a scrap metal yard.

Where is that one?

Used Goodman a few weeks ago and the operator didn't charge me at all as I didn't need a certificate
 
Morning Edwin,
We always use one of those listed above..

A W Jenkinson
Haweswater Road
Penrith Industrial Estate, Penrith CA11 9EU

54.6603426, -2.7674614

Nice ride up the A6 or M6 for you. Very easy access, Jenkinsons lorries are a lot bigger than your MH.:whistle:



Drive into the yard, you can turn round without reversing and back out onto the weigh bridge. Stop on the weighbridge and walk over to the office.
I always tell them I don't need a ticket and they write the weight down on a slip of paper - no charge.
I take a bottle of wine about every other visit.

Barry

20190419_095231.jpg
 
Last edited:
Found that government website particularly unhelpful - that redirected me to the SurreyCC website, which states that there are no weighbridges in Surrey!!

We use a local builders merchant, who are happy to let us use their weighbridge, for a contribution to their charity box!! I use the mobile to take pictures of the front, rear, and combined axle weights.That gives you a dated record.
 
Found that government website particularly unhelpful - that redirected me to the SurreyCC website, which states that there are no weighbridges in Surrey!!

We use a local builders merchant, who are happy to let us use their weighbridge, for a contribution to their charity box!! I use the mobile to take pictures of the front, rear, and combined axle weights.That gives you a dated record.
Good advice. I agree that the government and local authority sites aren't very helpful. Here in Wigan it looks like there are none. Went for a drive to a metal company in Westhoughton and found two companies next to each other with there own weighbridge. Look for a decent scrap metal dealer, usually charge a tenner.
 
Usually if there’s a quarry local, it will have a public weighbridge. Ours will weigh private vehicles.

Subscribers  do not see these advertisements

 

Join us or log in to post a reply.

To join in you must be a member of MotorhomeFun

Join MotorhomeFun

Join us, it quick and easy!

Log in

Already a member? Log in here.

Latest journal entries

Back
Top