Intro & Request for help (1 Viewer)

[RMcC]

Hi everyone
My first post and I have to say that I don’t own a Motorhome and probably never will - but let me explain....
I have a boat with a Truma BM14 gas fired boiler installed. She had work really well in the 21 years since I purchased the boat.
But the heater has now give up the ghost - I think the pcb had decided it has had enough!
horror when I learned that Truma units are no longer certified for Marine use.
Please can anyone advise if there are any service engineers who might be able to look at the pcb?
I am berthed in Ireland but could send it anywhere.

Kind Regards
Rodney

 

[Bessy765]

Whilst gas is common on a lot of boats, the factor to consider is lpg is heavier than air, any leaks can find there way into the bilges with potential danger, hence a lot of firms will no longer certify their products for marine use. Given the age of your boiler parts may well be hard to come by. Even with bilge alarms their is. A tendency to find alternatives such as oil or mains when in port. Appreciate this is not much help to you but my take on it.

 

[tonka]

Not sure if any help. But maybe worth a call.

Product and Repair List

List of items for repair for caravan and motorhomes

www.apuljackengineering.co.uk

 

[dunnah01]

These guys tested my Truma 6e pcb and do a post & return service so may be worth a call/email: http://www.arelectronics.co.uk/index.html

 

[ambulancekidd]

^{_{Subscribers  do not see these advertisements}}

 

[Stonemags76]

Try phoning Truma - they are usually good I hear.

Contact - Truma

The Truma customer service team is there for you if you require any help with your Truma product. If you have a question about an appliance, always have information about the appliance type, year of manufacture and factory number at hand. This will help us provide you with faster support. Where...

www.truma.com

 

[bobandjanie]

https://www.ebay.co.uk/c/22007132050

I suppose its difficult fitting a drop vent in a boat, but if it's been OK for 21 years, it's easier to replace with the same.

Bob.

 

[gus-lopez]

 

[mitzimad]

when i had problems i sent my pcb to trauma for testing it came back as working and then i decided to buy a new one anyways so still have the pcb not sure where though post some pics of your heater and board

 

[Snoopy]

Hi and welcome

^{_{Subscribers  do not see these advertisements}}

 

[davidbaldam]

Hi and welcome to FUN.

 

[HugoBNB]

Welcome

 

[f6c]

Welcome aboard

 

[Vipar]

Greetings peeps welcome from Bexley a land lubber