I need a DIY option to replace my activated charcoal filter

Riverbankannie

LIFE MEMBER
Joined
Mar 11, 2016
Posts
11,330
Likes collected
67,076
Location
Bristol
Funster No
41,967
MH
IH 630 RL PVC
Exp
12
I am throwing this out to all you money saving funsters.
My recirculating Neff cooker hood takes these filters pictured below. £80 :eek: I am on my second one and looking for a way to lesson the expense of buying another. It seems to me that the frame could be kept and new activated charcoal put inside and new charcoal filters stuck to the outside.
Anyone done this?
Is it worth it?
Am I just being too much of a cheapskate? (But I do like a challenge!)
5EEB5DE5-916D-4ACD-BB10-00A24CA826A6.png
 
Pretty sure you can buy the sheets and cut.
It’s not a sheet it is a solid block about inch thick which is like say a printer cartridge and designed for the whole thing to be replaced.
 
If you look on eBay you will find universal sheets for cooker hoods in different size. To use them I guess you would have to take your filter apart.
You can also get activated charcoal powder but I suspect this might be difficult to handle and not what is in your filter anyway.

Subscribers  do not see these advertisements

 
Last edited:
This site contains affiliate links for which MHF may be compensated.
Not a simple soloution, but is there anyway you could duct to the outside?
 
Not a simple soloution, but is there anyway you could duct to the outside?
That was considered at the time by the kitchen fitters and rejected as being too difficult a run of ducting. I didn’t press too hard as, at the time, my husband was recovering from a double heart bypass and had decided to give up all fried food so we only had steam to deal with from the hob.

Over the intervening years, he has developed a taste for frying things again :(

Subscribers  do not see these advertisements

 
I don't know if it's true but putting the filter out in bright sunlight is meant to help. Releases some of the trapped odours etc. You might need to Google for more info. One of our work fans used to say to put the filter outside in sunlight every month to prolong the life of the filter. Providing yours is not clagged up with grease it might be an option? (And, if it is clagged up, consider putting a grease trap filter cloth before the carbon filter?)
 
I don't know if it's true but putting the filter out in bright sunlight is meant to help. Releases some of the trapped odours etc. You might need to Google for more info. One of our work fans used to say to put the filter outside in sunlight every month to prolong the life of the filter. Providing yours is not clagged up with grease it might be an option? (And, if it is clagged up, consider putting a grease trap filter cloth before the carbon filter?)
Yes it is very greasy on the outside. I think that is a good idea to add some of the grease trap paper.
 
Could you soak it in warm bath with Fairy Liquid or similar then dry well in an oven (hot as you dare if the filter is all metal and charcoal) and when dry pop it outside on a sunny day. Might be worth a try as £80(ish) is a bit steep for a domestic hob fan filter. Won't be perfect but might see you through another few months and then with the new filter you can start off with the grease trap paper.

(y) (y)
 
If the charcoal in it is pellets you could cut a 20mm dia hole in the side, empty and refill with activated charcoal pellets probably cost less than a tenner. That's what I do with my SOG underfloor filter costs me about £3 instead of £25 for a new filter.

Subscribers  do not see these advertisements

 
Could you soak it in warm bath with Fairy Liquid or similar then dry well in an oven (hot as you dare if the filter is all metal and charcoal) and when dry pop it outside on a sunny day. Might be worth a try as £80(ish) is a bit steep for a domestic hob fan filter. Won't be perfect but might see you through another few months and then with the new filter you can start off with the grease trap paper.

(y) (y)

The frame is plastic

If the charcoal in it is pellets you could cut a 20mm dia hole in the side, empty and refill with activated charcoal pellets probably cost less than a tenner. That's what I do with my SOG underfloor filter costs me about £3 instead of £25 for a new filter.
I will order one of the compatible ones and then take apart the old one. Cannot just refill as the outside layer is the close woven mat type and that is grease laden.
I have to admit, I have not been changing every 6 months ! :whistle2:
 
  • Like
Reactions: BwB
We use a metal filter in our cooker hood, we just put it in the dishwasher to clean. But ours extracts outside for indoor I think you still need a carbon filter to get rid of the smells.
 
How do you know it needs changing?
Now that is a good question that I also pondered when I changed the SOG filter earlier this year. !
All I can say is that it looks clagged with grease on the underside, and it has been 10 years this April since we had the kitchen done and I have changed the filter once ! :whistle2: However no frying for the first 5 or so years, it’s been 17 years since hubby’s heart attack and now he has decided he is going to live, he has been treating himself to a bit more stir frying of veg.:unsure::oops:
 
Sounds like it may be due then, but it does also make the replacement cost a bit more bearable when it lasts a good few years.

Subscribers  do not see these advertisements

 
Is the replacement part like a cassette? Just asking because I replaced the innards of a thetford electric filter cassette. Just wondering if its the same sort of thing. The activated charcoal foam was cheap and the so were the granules. It might be worth having a look to see if it can be opened.
 
Is the replacement part like a cassette? Just asking because I replaced the innards of a thetford electric filter cassette. Just wondering if its the same sort of thing. The activated charcoal foam was cheap and the so were the granules. It might be worth having a look to see if it can be opened.
Not quite like the Thetford SOG one but I will take it apart once I get a replacement I will take it apart and examine it. I think I got the SOG one for about £17 so it wasn’t so bad.
 
Not quite like the Thetford SOG one but I will take it apart once I get a replacement I will take it apart and examine it. I think I got the SOG one for about £17 so it wasn’t so bad.
I bet there isn't anything amazing inside it when you take it apart.
£17 for the Thetford SOG thingy is the cheapest I've seen it but even at that price its still only some foam and a few granules.
 

Join us or log in to post a reply.

To join in you must be a member of MotorhomeFun

Join MotorhomeFun

Join us, it quick and easy!

Log in

Already a member? Log in here.

Latest journal entries

Back
Top