Hi funsters,
My 2004 Hymer is based on the standard Ducato 2.8JTD Maxi chassis. The coolant temperature gauge on the instrument panel has recently started playing up. It goes to about halfway when I turn the ignition on, then wanders randomly between zero and full scale. The engine itself is fine with no cooling problems.
I've checked all the wiring and connectors between the back of the instrument panel and the temperature sensor on the engine, but no change. So I suspect either a faulty temperature sensor or a fault/dry joint in the instrument panel circuitry.
Has anyone experienced a similar problem or got any good tips?
Thanks
Chris
My 2004 Hymer is based on the standard Ducato 2.8JTD Maxi chassis. The coolant temperature gauge on the instrument panel has recently started playing up. It goes to about halfway when I turn the ignition on, then wanders randomly between zero and full scale. The engine itself is fine with no cooling problems.
I've checked all the wiring and connectors between the back of the instrument panel and the temperature sensor on the engine, but no change. So I suspect either a faulty temperature sensor or a fault/dry joint in the instrument panel circuitry.
Has anyone experienced a similar problem or got any good tips?
Thanks
Chris