Ceiling TV brackets

[Chris Laing]

Thinking about an avtex tv for the bedroom area at back of MH. We have French Bed style but there is no good place to fit a bracket onto a side wall because the Shower wall is there. So option is to get a ceiling bracket and drop it down.

Does anyone have one fitted and whether or not its practical. I guess I would have to make a small metal plate for the outside of the roof to prevent the bolts from pulling through under pressure as well as putting silkaflex sealant on the outside.

 

[tonyidle]

Use adhesive to fix a plate to the shower wall then fit the bracket to that?

 

[SuperMike]

6” clout nails. Helpful arn’t I.

I know, I’m sorry I’ll leave NOW.

 

[Chris Laing]

I would rather not touch the wall where the shower tbh.

There is the option of bolting to the underside of the wall mounted cupboards but I don't know if they could take the weight.

Use adhesive to fix a plate to the shower wall then fit the bracket to that?

 

[pappajohn]

There is the option of bolting to the underside of the wall mounted cupboards but I don't know if they could take the weight.

I would bolt to the cupboard floor.
The ceiling isn't rigid enough to bolt right through, the roof will compress as you tighten the bolts...its only a foam cored sandwich and as well as looking a real bodge on the roof its a future leak pont.
The cupboard will be plenty strong enough.

^{_{Subscribers  do not see these advertisements}}

 

[Stroppy Bird]

I would rather not touch the wall where the shower tbh.

There is the option of bolting to the underside of the wall mounted cupboards but I don't know if they could take the weight.

This is what I have done with a quick release bracket, though I don't travel with the tv attached to it.