Adria Twin - Pre-wired for Reversing Camera - Advice Please

[Alesupper]

Hi All

Our 2018 Adria Twin 600 SP campervan is pre-wired for a reversing camera and the connectors on either end of the cable are 6 pin din connectors as shown in the attached photos. After some research I am lead to believe that Camos cameras use this type of connector. So I have two questions:-

1) Has anyone fitted a Camos camera system to their Adria (or any other MH)?
2) Has anyone fitted a 3rd party camera system to an Adria and somehow converted the connectors from the 6 pin din connectors?

Cheers, Alesupper

 

[James-Alex]

Hopefully someone will be able to help you. Not something I’m good at but lots are. All the best

 

[Stealaway]

Would this work -- or pull these wires thought with your old ones

<Broken link removed>

 

[Landy Andy]

Any good If you want to fit different make of camera and monitor

Adapter DRN-033A - for Camos cameras to Zenec Nav systems

Camos adapter DRN-033A For connecting a Camos camera to AV Cinch connector (e.g. for built-in moniceiver/naviceiver).

www.reimo.com

or these for waeco camera setup

Adria adapter for Camos cable Ducato X250

WAECO adapter >>ADRIA The set consists of the 2 adapters 9102200152 and 1 piece each ADAPT2: 9102200043 and ADAPT3: 9102200046. With this set all…

www.reimo.com

 

[Lenny HB]

In my Hymer I found the cables after I had run new cables through the van, good job too. New cables cost me £25, adaptors would have cost £80.

^{_{Subscribers  do not see these advertisements}}

 

[gpat]

Its seems weird that manufacturers bother to pre wire. I was told that they only do it for factory fit options but as it's so easy to do at the time they pre wire all the Van's. Even the dealers don't seem to bother using them and when I went to have a reversing camera fitted at the dealer, they just rewired it completely new as they said they couldn't be bothered with the preinstalled wires.

 

[Alesupper]

Any good If you want to fit different make of camera and monitor

Adapter DRN-033A - for Camos cameras to Zenec Nav systems

Camos adapter DRN-033A For connecting a Camos camera to AV Cinch connector (e.g. for built-in moniceiver/naviceiver).

www.reimo.com

or these for waeco camera setup

Adria adapter for Camos cable Ducato X250

WAECO adapter >>ADRIA The set consists of the 2 adapters 9102200152 and 1 piece each ADAPT2: 9102200043 and ADAPT3: 9102200046. With this set all…

www.reimo.com

Thanks Landy Andy but I don't fancy paying that sort of money for convertors that may or may not work.