17mm Corner Steady Winder (1 Viewer)

[Woodyallan]

Can anyone please help.?
My Autocruise Wentworth is fitted with rear corner steadies and it has a crank handle. Due to the years creeping up on me I was looking for an extension winder to fit in an electric drill. I also keep smacking my head on the bike rack when the bike is loaded.
Now here's the problem! most corner steady winders are 19mm but mine are 17mm and an extensive troll through the 'Tinternet' has not resolved the problem. Can anyone possibly tell me where I can buy one?
Thanks
Woody Allan

 

[pappajohn]

17mm socket and extension bar with the outer end cut/ground off.
It will then fit a standard 13mm Chuck and the end could even be ground to a hexagon..

Or better still....hacksaw the handle off your existing winder.

 

[Zains Pops]

As Papa said and then buy these to fix the extension into a drill or battery driver..

https://www.ebay.co.uk/itm/Impact-D...811922?hash=item5d68c6b6d2:g:5DAAAOSw~jNZYlz0

^{_{Subscribers  do not see these advertisements}}