Mud flap brackets

Caggsie1

Free Member
Joined
Sep 2, 2013
Posts
967
Likes collected
4,540
Location
North Wales
Funster No
27,897
MH
Hobby
Exp
Since 2008
Can anyone help me source the brackets for the Ducato x250 front mudflat. The brackets have corroded and the flap is still serviceable. We’ve been quoted £75 as fiat don’t supply just the brackets!!! So have to buy a set of two! Anyone able to make them? Please!
 
Are you talking about the two clamps that you put on each flap?
 
Don't use those clamp bracket things. I threw them away and used penny washers and tech screws. They hold on much better and are tight to the wheel arch without deformation 👍

PS grease them after.

Subscribers  do not see these advertisements

 
Whoops, I'm telling lies. I used a bracket washer and a tech screw, it's 6 years ago now 😁

20200824_132139.jpg
 
Are these what you are after, you are welcome to them if you pay the postage. We have 6 that you can have.
0F6CD7A5-B3DF-4082-BCBA-1C6CFCD3CA4D.jpeg
 
Are these what you are after, you are welcome to them if you pay the postage. We have 6 that you can have.View attachment 418604
I remember trying the brackets now and the top part of the flap where is goes round onto the van body was bending away from the body, looked tacky. That's why I made that bent washer what holds the flap to the body 👌
 
Are yours the thicker moulded type or the flat type.

The flat ones aren't that expensive, think ours were about £25-30 from the Peugeot dealer.

Subscribers  do not see these advertisements

 
Are yours the thicker moulded type or the flat type.

The flat ones aren't that expensive, think ours were about £25-30 from the Peugeot dealer.
See pic 🤔 they were about 50 quid and are proper Fiat ones. Van is peugeot but the fiat ones were cheaper and no badge on them.
 

Join us or log in to post a reply.

To join in you must be a member of MotorhomeFun

Join MotorhomeFun

Join us, it quick and easy!

Log in

Already a member? Log in here.

Latest journal entries

Back
Top