- Jun 24, 2019
- 305
- 407
- Funster No
- 61,884
- MH
- Hymer 504i A Class
- Exp
- Since 2016 & 20+ shed dragger
Hi, I have learnt a lot from all the tyre threads on the site and thought I would post my experience with the Michelin Agilis as they seem to be a bit of a "marmite" tyre.
The tyres are run at Hymer recommended 5.5 bar on Ducato based Hymer Exsis A class 3.5 t loaded just below max weight (I hope but have checked several time on weight bridges).
Tyres : Michelin Agilis 225/75/16 5.5bar
Mileage: 30,000 miles,
Tread remaining: Fronts 5mm, Rear 4.5mm with a very even wear. (Tyres where changes front to back about 10k miles ago).
Road holding: No complaints but first set of MH tyres so nothing to compare with.
Noise: Again, do not seem to cause a lot of noise - we can have normal conversation at all speeds.
Would be interested in other members experiences.
The tyres are run at Hymer recommended 5.5 bar on Ducato based Hymer Exsis A class 3.5 t loaded just below max weight (I hope but have checked several time on weight bridges).
Tyres : Michelin Agilis 225/75/16 5.5bar
Mileage: 30,000 miles,
Tread remaining: Fronts 5mm, Rear 4.5mm with a very even wear. (Tyres where changes front to back about 10k miles ago).
Road holding: No complaints but first set of MH tyres so nothing to compare with.
Noise: Again, do not seem to cause a lot of noise - we can have normal conversation at all speeds.
Would be interested in other members experiences.