I am still having problems with my omnistep operation, it's a slide out 400 on a hymer pvc 2009 .
It stopped working it went in OK but on trying to extend nothing ,I have tried a couple of the tests mentioned on the forum pp3 battery to terminals both retract and extend when reversed so not motor or gear box problems.
Tried a new switch same problem retracts but won't extend.
With a multi meter there is just under 12v at both activation wires in the switch.
I have followed the wires back and they go into a schaudt ems03 in the wardrobe above the fridge could thus be the problem and is there any way of testing it.
Thanks in anticipation
Chasnam
It stopped working it went in OK but on trying to extend nothing ,I have tried a couple of the tests mentioned on the forum pp3 battery to terminals both retract and extend when reversed so not motor or gear box problems.
Tried a new switch same problem retracts but won't extend.
With a multi meter there is just under 12v at both activation wires in the switch.
I have followed the wires back and they go into a schaudt ems03 in the wardrobe above the fridge could thus be the problem and is there any way of testing it.
Thanks in anticipation
Chasnam