Re-fillable gas bottle installation NE Scotland

ChrisMac

ChrisMac

Free Member
Joined
Apr 14, 2015
Posts
77
Likes collected
113
Funster No
35,857
MH
Elddis
Exp
Newbie
Brand new at this game but we picked up new MH last Saturday and really looking forward to getting out and about. Some great info. and advice on here We're heading off to Europe in Sept. for several months and I'm looking to install re-fillable gas bottler i.e gaslow or similar. Anyone know of installers in NE or even anywhere in Scotland. Local dealer quote was over 700 quid for install and supply for 2 6kg bottles!!!! maybe thats just what the price is?? Thanks in advance.
 
Sort by date Sort by votes
Welcome to the madhouse:)

How DIY competent are you? You can get DIY kits for less than half that price and fit them in an afternoon.
 
Upvote 0
(y)Thanks. Not DIY competent at all, if i did it i'd be expecting the MH to go BANG but i do know a few people who are pretty good,that's a route I could go down..
 
Upvote 0
This is the kind of thing that you could get - you may need a few other bits to complete the setup. Second hand bottles are cheaper.

Broken Link Removed

I've recently done mine - I'll look out the prices that I paid later.
 
Upvote 0
Excellent, thanks for that. Was looking on Gasit website, they had a 6 and 11kg diy kit that didn't have the external fill (no need to make a hole in the MH body). Stating it's UK and EU compliant. I'd be a bit concerned about not being allowed to fuel up if the garage attendants saw me opening the gas bottle door??

Subscribers  do not see these advertisements

 
Upvote 0
ChrisMac said:
Brand new at this game but we picked up new MH last Saturday and really looking forward to getting out and about. Some great info. and advice on here We're heading off to Europe in Sept. for several months and I'm looking to install re-fillable gas bottler i.e gaslow or similar. Anyone know of installers in NE or even anywhere in Scotland. Local dealer quote was over 700 quid for install and supply for 2 6kg bottles!!!! maybe thats just what the price is?? Thanks in advance.
Click to expand...

Might be an idea to check on the prices further South. You could stop off on the way down, just a thought. Good Luck (y)
 
Upvote 0
I just bought the gasit system with external filler point from Gumtree for £190. Had only been used for one trip and the guy tore the roof of his MH, hence the sale. Keep your eyes open on Gumtree, Ebay and Preloved. You just might get lucky.
 
Upvote 0
Hi @ChrisMac if you get stuck give me a pm... I'm up Inverness way in June for a meet and if you had the gear sorted I'm sure I could fit the stuff for you...
Some prefer the external fill and you can get a bracket to install fill point in the locker.. whatever you prefer. ..
I intend been up that way a few days before the meet at Inverness anyway..
Just let me know
Ta Andy. ..
 
Upvote 0
Thanks folks. @andy63, thanks for that offer, much appreciated. We'll be going up that direction ourselves quite a lot to see family so may well be in touch about that.

Subscribers  do not see these advertisements

 
Upvote 0
Another possibility for you is Perthshire caravans near errol on the A90 between Dundee and Perth. They fitted a gaslow system for me at reasonable cost.

I had it transferred to our second van and the dealer put the filler inside the locker, rather than in the skirt. I have opened it and refilled without any issues in many places in UK and abroad.

Dave
 
Upvote 0
Thanks Dave. Went there a few timeswhen we were looking at MH's. I'llget a quote from them i think. Good to know about no issues with the inside filler (y)
 
Upvote 0
Upvote 0
Wow, some great advice, thanks to you all. Think I'll have a look at the diy option and rope in someone who has a better idea than me, I'll let you know how it goes.
 
Upvote 0
Opted for the twin 6kg Gasit set up manual changeover, with internal locker fill. Still to be installed but hopefully get it done this week so we can give the MH a proper test. Thanks again.
 
Upvote 0
ChrisMac said:
Opted for the twin 6kg Gasit set up manual changeover, with internal locker fill. Still to be installed but hopefully get it done this week so we can give the MH a proper test. Thanks again.
Click to expand...
Can't fault that decision , we have just one 6kg gasit, otherwise the same, took maybe an hour to fit and most of that was deciding where to put the filler.

Subscribers  do not see these advertisements

 
Upvote 0
chaser said:
Can't fault that decision , we have just one 6kg gasit, otherwise the same, took maybe an hour to fit and most of that was deciding where to put the filler.
Click to expand...

Hiya I'm thinking of doing the same - where did you put the filler and how easy was it to fit (the filler that it).
 
Upvote 0
TheWM said:
Hiya I'm thinking of doing the same - where did you put the filler and how easy was it to fit (the filler that it).
Click to expand...
Put mine inside the locker, in the end screwed to the bottom rail , I got a photo on here somewhere, il look it out
 
Upvote 0
chaser said:
Put mine inside the locker, in the end screwed to the bottom rail , I got a photo on here somewhere, il look it out
Click to expand...

Would like to see the photo!

We need to check out how much gas is left in our cylinders before we set off weekend after next. I'd rather fit a refillable than get another "hire" cylinder.
 
Upvote 0
Puddleduck said:
Would like to see the photo!

We need to check out how much gas is left in our cylinders before we set off weekend after next. I'd rather fit a refillable than get another "hire" cylinder.
Click to expand...
There you go, you will see also I have somewhere to store my pipes and leads(y)
image.jpg
 
Upvote 0
:thanks3:@chaser Looks neat.

It's persistently raining with a hint of snow so checking how much gas is left will have to wait.

Subscribers  do not see these advertisements

 
Upvote 0
Puddleduck said:
:thanks3:@chaser Looks neat.

It's persistently raining with a hint of snow so checking how much gas is left will have to wait.
Click to expand...
Actually, usually looks better than that, I've been moving stuff around and just pushed the hose in but couldn't find my original photo just just took another with it in the rough(y)
 
Upvote 0
And the pipe doesn't slope as much as it looks must be some sort of optical illusion by the way I was holding the iPad
 
Upvote 0
Our cables are on a holder that Martin made and which lives in the garage.

The gas locker is quite small and contains the 6kg cylinder plus a small bottle of camping gaz that runs a stand alone cooker.

The only concern I have with the refillable bottles is finding somewhere to fill them as our local garage that did LPG hs closed.
 
Upvote 0
@chaser thanks am I right in thinking that the black box at the bottom is your filler point? And is not external?
 
Upvote 0
I put the filler inside the locker as well. Was easy to fit, must have been as I'm useless at diy. I'll take a pic and post it
 
Upvote 0

Join us or log in to post a reply.

To join in you must be a member of MotorhomeFun

Join MotorhomeFun

Join us, it quick and easy!

Join us

Log in

Already a member? Log in here.

Latest journal entries

Back
Top