Led bulbs (1 Viewer)

[Don't know]

Looking for advice, I am presuming this photo of the bulb is a halogen, I have uploaded, I would like to change all 7 in total to led lights on my b584 Hymer 2002 model. My questions do I just buy led light and plug in. And his there a certain wattage. And has anybody got any recommendations. Has I don't really want to be buying cheap and nasty. Thanks

 

[andy63]

No experience myself replacing bulbs for led...but from reading posts ,just make sure you get the right fittings and there appear to be all mane of shades of white... It might be better to check them first so you have a pleasing light and not something that is too bright or harsh...
Andy..

 

[Figaro]

Arten lighting do a good range, I had mine from them to replace lights in Hymer. I went for the soft white

 

[hilldweller]

That is a difficult one to replace, it's so compact no LED is an exact replacement. I have done many but ended up having to modify the big round ones with extended wires.

 

[chippy63]

these are what i used,

http://www.ebay.co.uk/itm/G4-6SMD-5...hash=item1c57358359:m:mKxvxq7FXJhGdXAl15csyWw

Mine were the same as your original, B574
Karl

^{_{Subscribers  do not see these advertisements}}

 

[DavidG58]

this is what I used, some of mine needed to be the short length to allow doors to open underneath them in bathroom

 

[Mr B]

I got these. Seem very good
Item no eBay
151955660765

 

[Don't know]

these are what i used,

http://www.ebay.co.uk/itm/G4-6SMD-5...hash=item1c57358359:m:mKxvxq7FXJhGdXAl15csyWw

Mine were the same as your original, B574
Karl

Thanks a lot I will be ordering this type now,

 

[scotjimland]

I don't really want to be buying cheap and nasty. Thanks

Replaced mine in my Hymer 2002, with these.. from Aten lighting.. not cheap and nasty , voltage regulated10-30V, and are not polarity sensitive - i.e. the LED will light up whichever way the positive and negative power is applied so no rewiring is required.

10 LED G4 side pin.http://www.atenlighting.co.uk/10led-side-pin-g4-371.html

 

[DavidG58]

Thanks a lot I will be ordering this type now,

they will not fit, you need the barrel shaped ones to be closest to the one you are replacing

more like these

the others will probably do some of the other lights though, we had to use both types, and some others

^{_{Subscribers  do not see these advertisements}}

 

[Steve N Tracy]

I bought 10 of these 3.5 watt ones to replace the halogens on my caravan

 

[Don't know]

Replaced mine in my Hymer 2002, with these.. from Aten lighting.. not cheap and nasty , voltage regulated10-30V, and are not polarity sensitive - i.e. the LED will light up whichever way the positive and negative power is applied so no rewiring is required.

10 LED G4 side pin.http://www.atenlighting.co.uk/10led-side-pin-g4-371.html

Just a thank you,I just got back home today, the above light bulbs above have been delivered, and pleased to say all 8 fitted in the motorhome.