Inverter isolation switch

[Neil S]

Looking for an isolation switch which can be screwed to the floor with cable entry points at either side
Every one I’ve found online seems to have 10mm nuts and my cabling is 8mm eyelets
Can anyone suggest something suitable

 

[pappajohn]

For 12v input side or 230v output side ?

 

[Neil S]

For 12v input side or 230v output side ?

12 volt feed from the leisure battery to the inverter

 

[Stealaway]

Looking for an isolation switch which can be screwed to the floor with cable entry points at either side
Every one I’ve found online seems to have 10mm nuts and my cabling is 8mm eyelets
Can anyone suggest something suitable

Drill them out 10 mm.
Smaller rampage battery isolater switch

 

[tonyidle]

What current do you anticipate switching? I'd use a relay anyway.

^{_{Subscribers  do not see these advertisements}}

 

[pappajohn]

I think you'll only get a rotary isolator to carry the high amps.
You could use a small switch to switch a high amp relay

 

[Neil S]

What current do you anticipate switching? I'd use a relay anyway.

I’m only running a low wattage hairdryer about 600 watts AC

 

[tonyidle]

I’m only running a low wattage hairdryer about 600 watts AC

So about 50A at 12v. The benefit of a relay is that you can use any little 12v switch in any convenient position.
Or something like this without a relay <Broken link removed>