Ideas for extra seal on Dometic service (wc) hatch please (1 Viewer)

Wombles

LIFE MEMBER
Oct 28, 2013
10,808
11,132
SW England
Funster No
28,783
MH
Van Conversion
Exp
A few years now
Our hatch has one internal seal on the drop down door but would like to add an additional one in the groove - has anyone already done this or has ideas of best seal to use & where to buy it?
This type of Dometic hatch which gaps a bit at the top:
IMG_20210713_145021637.jpg


IMG_20210713_144943240.jpg


Additional seal to go in groove on the drop down door:
IMG_20210713_144924266_HDR.jpg
 

DuxDeluxe

LIFE MEMBER
Jul 10, 2008
14,658
72,784
Planet Zog
Funster No
3,243
MH
A woosh bang van
Exp
since 2008
Hi @Wombles….. have you had a look here?


or this one

 
Last edited:
Oct 12, 2009
10,663
23,656
SW London, Poland and all Europe
Funster No
8,876
MH
A Class N+B Arto 69GL
Exp
Since 2009
Our hatch has one internal seal on the drop down door but would like to add an additional one in the groove - has anyone already done this or has ideas of best seal to use & where to buy it?
This type of Dometic hatch which gaps a bit at the top: View attachment 515919

View attachment 515920

Additional seal to go in groove on the drop down door:
View attachment 515921

Why do you want to do that?

Subscribers  do not see these advertisements

 
OP
OP
Wombles

Wombles

LIFE MEMBER
Oct 28, 2013
10,808
11,132
SW England
Funster No
28,783
MH
Van Conversion
Exp
A few years now
Why do you want to do that?
In extreme weather a small amount of rain can sometimes get past the existing seal & accumulate in the base of the frame so could eventually end up inside - trying to avoid this potential problem.
 
Aug 9, 2020
428
648
Funster No
74,151
MH
Wildax
Exp
~20 years
My caravan lockers had a stuck on 'gutters' above the lockers. Perhaps a length of fiamma drip stop?

Subscribers  do not see these advertisements

 
Jul 29, 2013
9,071
18,539
Salisbury
Funster No
27,215
MH
Hymer B678DL A class
Exp
since 2011
Could you not just turn door& frame to hinge at top or side? Ours is hinged at top doesn’t seem to leak through the seal🤔😊
 

Lenny HB

LIFE MEMBER
Oct 18, 2007
53,440
150,044
On the coast in West Sussex
Funster No
658
MH
Hymer B678 DL
Exp
Since 2008 & many years tugging
Could you not just turn door& frame to hinge at top or side? Ours is hinged at top doesn’t seem to leak through the seal🤔😊
Karen has a Dometic not a Thetford so it will be a different construction.

Subscribers  do not see these advertisements

 

Lenny HB

LIFE MEMBER
Oct 18, 2007
53,440
150,044
On the coast in West Sussex
Funster No
658
MH
Hymer B678 DL
Exp
Since 2008 & many years tugging
If buying the Fiamma drip strip most of the Fiamma stockists only sell it in 0.75m, 3m, & 10m lengths if you go on ebay there are sellers selling by the metre.

Subscribers  do not see these advertisements

 
OP
OP
Wombles

Wombles

LIFE MEMBER
Oct 28, 2013
10,808
11,132
SW England
Funster No
28,783
MH
Van Conversion
Exp
A few years now
Thank you for all the suggestions so far - we do have stick on guttering over the sliding door https://www.motorhomefun.co.uk/foru...on-van-conversions.202952/page-2#post-4148269 but almost invisible & it's not enough of an issue to justify adding it over the hatch as think it would stand out a bit too much. It's more ideas for a desirable enhancement than a fix as luckily it's hardly & rarely an issue at present. Will have to look at the seals website & see what might work - was being lazy & hoping someone had done it before!
 
Jul 29, 2013
9,071
18,539
Salisbury
Funster No
27,215
MH
Hymer B678DL A class
Exp
since 2011
Thank you for all the suggestions so far - we do have stick on guttering over the sliding door https://www.motorhomefun.co.uk/foru...on-van-conversions.202952/page-2#post-4148269 but almost invisible & it's not enough of an issue to justify adding it over the hatch as think it would stand out a bit too much. It's more ideas for a desirable enhancement than a fix as luckily it's hardly & rarely an issue at present. Will have to look at the seals website & see what might work - was being lazy & hoping someone had done it before!
Another way would be to put a large bead of silicone along the top and sides and allow to set before closing the hatch thus forming your own bead🤔
 

Join us or log in to post a reply.

To join in you must be a member of MotorhomeFun

Join MotorhomeFun

Join us, it quick and easy!

Log in

Already a member? Log in here.

Latest journal entries

Funsters who are viewing this thread

Back
Top