Hymer error code 232 (1 Viewer)

[JeffH]

we have a 2015 hymer and every so often the fresh water pump pump stops working and we get an error code 232 on the panel. If we turn off all 12v and back on again it then works?
Can anyone help please?
Thanks

 

[Lenny HB]

Wasn't aware Hymer fitted digital control panels to 2015 Hymers thought they dropped them years ago.
Can you post a photo.

 

[Lenny HB]

Just had a thought, did you mean the CP-Plus panel for the Truma heating?
I think 232 on that panel is low voltage or no 12v supply.
Could be your battery has had it. If it's the original AGM it's well past its sell by date, especially if you have the older EBL that does not support AGM and it's set to gel.

 

[DavidG58]

we have a 2015 hymer and every so often the fresh water pump pump stops working and we get an error code 232 on the panel. If we turn off all 12v and back on again it then works?
Can anyone help please?
Thanks

I know this is an old thread but we have a man down with the same fault, did you ever find a fix? ?

Hils and Glenns I do know you are not a man Hilary, just a figure of speech, but it is affecting Glen as well ??

 

[Hils and Glenns]

Thanks DavidG58. For bringing this up. For the time being we've had a few glasses of red. We'll readdress the problem tomorrow. In the meantime we have a jug of water at the ready. It's not life threatening
We've been keeping up with your stuff. No water is no big deal by comparison. Hope you and Bev get some respite. We've been there so know how difficult it is. Take care.

^{_{Subscribers  do not see these advertisements}}