Fixing tv to wall bracket (1 Viewer)

[Diggerdi]

Our moho already has a tv bracket fitted, but there are no screws/bolts. Should these come with the tv or will we have to purchase some? If so, would we be able to get them from B & Q?

 

[Mickey1]

Yes. They come with the bracket, bet they're hiding somewhere.

Mickey.

 

[Diggerdi]

Haven't found any. The only thing we've got is a mystery remote control that is in a plastic bag attached to the rail in the wardrobe. Haven't got a clue what that's for. Maybe the screws are already on the bracket, I haven't looked at it closely!

^{_{Subscribers  do not see these advertisements}}

 

[Deleted member 29692]

Look at the back of the TV. Sometimes you find them already screwed into the fixing holes.

 

[pyro]

Didn't come with mine, but 98p at B&Q sorted that out. Can't remember the size, but suggest hex bolts, and check the length

 

[magicsurfbus]

Does your TV have a stand for putting it on a table? Sometimes the bolts for fixing that are the same size as the wall bracket bolts.

I'm guessing the bracket is VESA compliant and there are different bolt sizes for them. Our bracket came with two different sets anyway. You might need washers too.

Your wardrobe may be where the cable for whatever TV receiver/antenna you've got comes in from the roof. Could the remote be related? If unsure, try typing the remote's model code into Google or eBay.

^{_{Subscribers  do not see these advertisements}}

 

[Lenny HB]

Most of the smaller TV's use M6 screws for mounting you need to check the length often 16mm should give size in TV instructions.

 

[pyro]

Correct Lenny, and an idea might be to get some shakeproof washers at the same time.

 

[Linda and Steph]

Is the motorhome new or pre-loved? If the latter then it's possible that the previous owner has kept the fixing bolts.

^{_{Subscribers  do not see these advertisements}}

 

[Lenny HB]

Is the motorhome new or pre-loved? If the latter then it's possible that the previous owner has kept the fixing bolts.

You don't get any screws with new Hymers.

 

[gerry mcg]

The 19 " Cello traveller tvs uses vesa mount with m4 bolts. I ordered the ones I needed from Westfield Fasteners http://www.westfieldfasteners.co.uk/
I used m4x12mm bolts for my mount

 

[peterc10]

You don't get any screws with new Hymers.

Ours came with a quick release bracket that screws on to the TV. The screws for that came with the TV.

^{_{Subscribers  do not see these advertisements}}

 

[Kevan]

my new 19" Cello TV just purchased, came with four (screws/bolts) to fit onto bracket.

 

[Robert Clark]

You don't get any screws with new Hymers.

Unless you buy from a British dealer
Then you get totally screwed

 

[TheBig1]

m4 12mm pan heads are used in all the tvs under 24" that i have fitted. available in b&q hardware aisle

^{_{Subscribers  do not see these advertisements}}

 

[Diggerdi]

No screws anywhere in moho. TV instructions say M4 x 8mm. Off to B & Q then.