Egine and gere box need to come out

[Wildbill]

Looks like I am going to have to pop the engine and gere box out lost the gears
Looks like a selector pin has come adrift
On the gear lever that go's on the change shaft thingymabob
Shuld take abut a day to do
Bill

 

[sueandjohn]

Shame bill - good luck

 

[gus-lopez]

Sorry to hear that . Can the box not be removed alone ? & you take it easy as you shoudln't be doing too much .

 

[funflair]

I would have thought that by now you would just whistled and it would "pop itself out" Bill.

Used to have a mate with a Hillman imp and we had it down to less than 15 minutes for the engine out, me underneath and him up top (Ooo Err Mrs).

Martin

 

[Wildbill]

Sorry to hear that . Can the box not be removed alone ? & you take it easy as you shoudln't be doing too much .

I could take the box out but I still have to disconnect the drive shafts and botum engine mounts with it being a 2.8 conversion it's very tight just as easy to take the engine out and do timing belt clutch filter change small oil leek and sort out a few wiring problems
I can the modifications to the exust as well while I am at it
Got a week of good weather thermal overalls right next to my garage I spent a week tiding up before I went in to Hospital
Will take about week of doing sumthing oily
Don't worry I will take it easy
Bill

^{_{Subscribers  do not see these advertisements}}

 

[Wildbill]

I would have thought that by now you would just whistled and it would "pop itself out" Bill.

Used to have a mate with a Hillman imp and we had it down to less than 15 minutes for the engine out, me underneath and him up top (Ooo Err Mrs).

Martin

Fastest is 45min on my own but will have to take it easy so it looks like 46min
Bill

 

[p-c]

Hillman imp and we had it down to less than 15 minutes for the engine out

Was that pulling the engine out or pushing the car forward?
Oh memories.
Regards
p-c

 

[funflair]

Was that pulling the engine out or pushing the car forward?
Oh memories.
Regards
p-c

We had a 3 point cradle for the engine, a big jubilee clip around the Doughnut joint from memory and then I guess we pushed the car away but it was a long time ago.

Martin

 

[kelpie]

Take care of yourself and don't overdo it. Listen to your body'
John

 

[mike mcglynn]

I used to take the engine out of my mother in laws Hillman imp on my own and do the biz.in about an hour and just pushed the car forward ,Nowadays I don't know what I'm looking at in the engine bay

^{_{Subscribers  do not see these advertisements}}

 

[pappajohn]

Nowadays I don't know what I'm looking at in the engine bay

You're looking at the plastic engine cover.
It's there to say.... NO user serviceable parts inside.