Alde 3010

[David Dewar]

I have an Alde 3010 system and there is no 12v output from the top of the PCB going to the circulation pump fitted in the header tank. I have checked both cable and pump and both are ok. Any suggestions?

 

[Mike Kiff]

Hi from Devon,
Had the same problem, on top of the boiler there is a black panel that slides off and near the back are two fuses and maybe one has blown.

Mike

 

[David Dewar]

Hi Mike, many thanks for your reply, I had checked the two fuses and both were good. I subsequently had a call back from Andy at Southdowns Motorhomes who told me that this circulating pump only works when the mains have been disconnected and you are running on battery, so I tried this and the pump works just fine.

David