Hymer specific tie-downs ? (1 Viewer)

[Nigel Crompton]

I started to put some extra tie-down eyes in newly acquired Hymer, only to find that I couldn't fit the ones I had because all the ends of all three tracks are inaccessible. The 4 Hymer supplied ones can be tilted to insert or remove from the track, a type I've never seen before.

Are they Hymer specific and does anyone know a non-main dealer source?

Failing that I'll have to cut slots in the channels to allow my fixings to be used.

Doh! forgot images ...

 

[Detnor]

The T bolts in my Hymer are made by Halfen, the eye is a generic eye nut. There may well be other variations.

 

[hymerman]

I might be being stupid here but I don't understand what you mean by tie-downs.

^{_{Subscribers  do not see these advertisements}}

 

[Nigel Crompton]

Third attempt to post images ...

Ring bolts fitted in channels so you can tie stuff down in the m/h garage .... looks like I'll have to cut a slot in each so I can re-use the ones I have ..

 

[Figaro]

What exactly are you planning on tieing down please ?

 

[SandJ]

Bought mine off eBay and not Hyner specific if I find link I’ll post on here. Or you could cut alternate corner off

^{_{Subscribers  do not see these advertisements}}

 

[Nigel Crompton]

What exactly are you planning on tieing down please ?

Hitch-hikers ....

 

[Buster30]

Search for hymer t bolt on eBay for a piccy of what they look like

 

[Nigel Crompton]

Bought mine off eBay and not Hyner specific if I find link I’ll post on here. Or you could cut alternate corner off

Easier to use the dremel to put a slot in the top of the channel at one end, I think

^{_{Subscribers  do not see these advertisements}}

 

[Nigel Crompton]

Search for hymer t bolt on eBay for a piccy of what they look like

Yep, them's um, pricey tho' ...

 

[JeanLuc]

The ring bolts in my Hymer garage are like this ........
https://www.ebay.co.uk/itm/HYMER-MO...676109&hash=item2a95ef252e:g:mI4AAOSwyQtVsffw

Mine are an earlier and simpler model without the extra locking nut.

 

[Wagoneer]

Your first pic looks same as mine, bought from the Fiamma website.

Mine wouldn't fit either, so used a dremmel tool to make an enlarged slot at the end.

This was on a Carthago but would expect the Hymer bar profile to be the same. They wanted silly money for Carthago specific hooks.

^{_{Subscribers  do not see these advertisements}}