Help! Maxview Dish stuck in up position (1 Viewer)

[The Dudess]

On a Sosta in Italy. Raised dish for first time in 6 weeks. Dish now stuck up and won't retract. Changed fuse in control box which had blown. Changed fuses 3 times and each time it has blown. Any ideas please. Happy to do without dish but need it to retract. Now run out of fuses.

 

[rb62]

The best way if you can is to get to the dish and slacken the bolts either side that hold the dish and LNB arm,lower them down and retighten bolts.

 

[Silver-Fox]

The best way if you can is to get to the dish and slacken the bolts either side that hold the dish and LNB arm,lower them down and retighten bolts.

That’s what I would do.
There’s obviously a motor fault.

 

[The Dudess]

Silver-Fox rb62 Thanks for your advice. Success - sort of. Undid the bolts, however when the dish was lowered it stuck out over the side of the motorhome so the whole lot had to come off. Hope a new motor isn't too expensive. Off to Austria now.

 

[David90]

My Maxview target satellite dish has now got stuck in the upright position, did you solve the problem, if so what was the answer. Thanks.

^{_{Subscribers  do not see these advertisements}}

 

[rb62]

Can you be of any help The Dudess ?

 

[David and Sally]

Lee Rasberry may be able to advise.

 

[Lee Rasberry]

My Maxview target satellite dish has now got stuck in the upright position, did you solve the problem, if so what was the answer. Thanks.

Hi David,

Give us a call on +44 (0) 1553 811000

Regards,
Lee

 

[David and Sally]

Hi David,

Give us a call on +44 (0) 1553 811000

Regards,
Lee

Top man Lee.

 

[The Dudess]

Can you be of any help The Dudess ?

Not really - we had to take the whole thing off and put it in our garage.

^{_{Subscribers  do not see these advertisements}}

 

[ctc]

Had the same problem, turned out to be a broken wire in the harness if I remember correctly it was the green one. Either a new harness from Maxview or a soldering iron.