Terry
LIFE MEMBER
Thinking about making a backbox and fitting onto the back of the van (where else) problem is I have both water filling and fridge vents on the back:Sad:
Idea is to make a couple of ali brackets out of 3mm angle iron that can fold down and sit the box onto them leaving around a 4 or 5 ins gap for the fridge vents and fit above the water filling inlet.This should then allow another fixing to be made around 3/4s way up the box/brackets :thumb:
Any thoughts on the idea and if 4 to 5 ins will be wide enough for the vents or even if I could get away with 3 ins gap from the vents ?
Box size at the moment is 10 ins wide by 39 ins long and 30 ins deep ish (250mm x 1 mtr x750mm ish) it may also grow to 1.5 mtrs long
Terry
Idea is to make a couple of ali brackets out of 3mm angle iron that can fold down and sit the box onto them leaving around a 4 or 5 ins gap for the fridge vents and fit above the water filling inlet.This should then allow another fixing to be made around 3/4s way up the box/brackets :thumb:
Any thoughts on the idea and if 4 to 5 ins will be wide enough for the vents or even if I could get away with 3 ins gap from the vents ?
Box size at the moment is 10 ins wide by 39 ins long and 30 ins deep ish (250mm x 1 mtr x750mm ish) it may also grow to 1.5 mtrs long
Terry