Yorick...You have to allow for old age...Im at that funny age now ! Anything could mean something to me ! I can only hope! lol
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Funny how simple Forum posts descend into Male testosterone 'speak'....
Subscribers do not see these advertisements
Yeah, that was the plan 'When I get a new dipstick'!Another option.. If you have a new Dipstick.
Pull it out as far as it will go then cut the bugger off at the top of the tube and pull it downwards and out.
If the new one won't go in use the top of the old one to seal the tube until you get a new tube.
Sorry, never gave the spring a second thought.Thanks for the tip, but it is on a spring so yanking will just expand the spring.
When I get a new pipe and dipstick I'll give it a go.
I just don't want to 'do it' as we are using Rig at the moment.
Subscribers do not see these advertisements
Still no joy from Fiat Commercial despite 3 emails and 3 calls - Hopeless.
I gonna go down there and shove that dipstick where the sun don't shine - till I get a new pipe.
Still no joy from Fiat Commercial despite 3 emails and 3 calls - Hopeless.
I gonna go down there and shove that dipstick where the sun don't shine - till I get a new pipe.
Funny how folk get brave on a keyboard.I`m sorry..... and I know i`m not the brightest star in the sky when it comes to technical stuff...
Be it Mechanical or Electrical.... BUT...... I am at a loss and only to willing to learn...
Could you please explain to me ...
How the are you going to take said dipstick down to "Fiat Commercial" and stick it where the sun don`t shine ...
When you don`t seem to have the knowledge or know how to get the little bastard out in the first place...
Subscribers do not see these advertisements
Funny how folk get brave on a keyboard.I`m sorry..... and I know i`m not the brightest star in the sky when it comes to technical stuff...
Be it Mechanical or Electrical.... BUT...... I am at a loss and only to willing to learn...
Could you please explain to me ...
How the are you going to take said dipstick down to "Fiat Commercial" and stick it where the sun don`t shine ...
When you don`t seem to have the knowledge or know how to get the little bastard out in the first place...
Yes Kev, I tried the bleedin obvious but it will not come out UP or DOWN. I think there is a NUT or something down the tube that 'grabs' the spring as you pull UP or DOWN.Bare with me here but...You have had the sump off and refitted a new one with a new gasket ?
SO ...You have had access to the underside of the engine where the dipstick pops through? Yes?
So...Whilst it was out...with a torch...could you not see up the orifice where the dipstick comes through?
Look...long and short of it is this...The stick WILL pull through . With the sump off....Did you not attempt to pull it down the tube instead? If it moved ...you would have only needed to take the plastic T handle off and pull it through from the bottom! That is "Simples"
Kev
Yorick...Dont take it out of context bud.. Its not meant to be a rant at anyone. Especially from Old Mo..Funny how folk get brave on a keyboard.
I bet you wouldn't be that brave face to face.
He seems like a nicer bloke than you with your attitude.
I`m sorry..... and I know i`m not the brightest star in the sky when it comes to technical stuff...
Subscribers do not see these advertisements
Funny how folk get brave on a keyboard.
I bet you wouldn't be that brave face to face.
He seems like a nicer bloke than you with your attitude.
11 inches up the pipe is 'nothing'... so there must be something in there thats' jamming me?
See my friends this Friday...
Calm down chaps... I took no offense and got the humour.F.F.S............... I think Calamaster the original poster realised that it was a tongue in cheek reply... like most other`s with a sense of humour..
If he did not think that.... I apologies...
With members like that who needs it.... (Yorick )..
See my friends this Friday... Wont be answering any PM`s...
So PLEASE DON`T PM/Conversation me..... Cos I wont receive it them...
Funny how folk get brave on a keyboard.
I bet you wouldn't be that brave face to face.
He seems like a nicer bloke than you with your attitude.
Subscribers do not see these advertisements
"Hello I'm Justin"I once went out with a bloke named Justin....
Funny how folk get brave on a keyboard.
Are you accusing me of drinking too much ? Please say what you mean ?Funny how rude folk get on the internet after drinking Spanish plonk
Are you accusing me of drinking too much ? Please say what you mean ?
I haven't drunk any plonk as you inferred for about 20 years. And I saw no rudeness. But am getting fed up of you persuing me.If the cap fits mate.. but no i was just looking for an excuse for your rudeness
Subscribers do not see these advertisements