Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
BITS4REASONS NEW MODEL MAYPOLE MP374B 200-250V 16A UK HOOK-UP LEAD 3 PIN/MAINS ADAPTOR CARAVAN MOTORHOME TRAILER CAMPING CAMPERVAN WITH EASY FUSE REPLACE PLUG £11.99
NOCO Boost X GBX45: 1250A UltraSafe Jump Starter Power Pack – 12V Car Battery Booster, Portable Power Bank & Jump Leads - For 6.5L Petrol and 4.0L Diesel Engines £113.00
Bosch H7 Maxibox Halogen Bulb Set for Car Headlights and Lamps, 12 V - Socket Type PX26d - Spare Bulb Box Containing the Most Essential Bulbs and Fuses £18.45
Cadac Safari Chef 2 Pro QR BBQ - Black £139.95 We have had three Fiat ducato based vans starting in 2013 all new 1 Autotrail and two Hymers and none have had a battery cover like that shownMine never had a cover
That's nice! you even know the name of the Yodel delivery driverYodel delivered this morning, that is fast! Well done Tanya
That's nice! you even know the name of the Yodel delivery driver

Thanks for info, my battery is in the engine bay.If you have a cab radio that has a secure code have it to hand before you start
If your alarm has special instruction for resetting? either have the instructions or contact the supplier/installer
I encountered no problems and I had a residual voltage feeding back to the cab due to a Sterling BtoB being installed.
Be absolutely sure you have the correct replacement battery! physical size capacity and terminal configuration.
Remove the cab carpet and there is the floor panel with coin turn fixings a 50p piece is good, just half a turn on each
![]()
Now you have the battery box cover, just remove the two nearest 13mm bolts.
The lid hinges up and then pull it away from the hinges towards you.
![]()
This is what you will find
![]()
Now remove the battery clamp 13mm nut
![]()
Now disconnect the Negative clamp, no spanner needed here but best to remove the cable out of the way altogether by removing the 13mm bolt to the chassis also.
![]()
Now remove the terminal cover at the +ve end
![]()
Remove these two screws and the red plastic doobree lol
![]()
Then slacken the +ve clamp nut 10mm ring spanner and lift the lot clear
![]()
![]()
Pull out the old battery
![]()
Present the new one
![]()
Be sure to remove both transit plugs
![]()
Reverse the whole procedure Amen
EDIT this is a left hand drive vehicle so do not be confused by that.
Just disarm your alarm whilst changing the batteryHope you can help. I am looking at getting a new cab battery, but have an alarm which is run off that battery, which was mentioned?
My issue is whether I take the old battery off and hope the alarm does not go off. Other than that, I have a good system to provide the cab battery if the battery fails, used for a Jump Starter. The alarm is fixed in the vehicle battery under the steering wheel to the right of the fuse board, if that helps.
Thanks
Tony
I would if I had the knowledge to do so. I don't even know what make it is. I just know that it's on somewhere on the van, so 'taking it off or disabling it. I am not aware of how to do so or what make it is.. And linked up from the alarm is fixed in the vehicle battery under the steering wheel to the right of the fuse board; and that's it.Just disarm your alarm whilst changing the battery![]()
Forum posts reflect the views of individual users and not MotorhomeFun.
MotorhomeFun does not endorse or verify user-generated content.
We use essential cookies to make this site work, and optional cookies to enhance your experience.