Pug X250 electrics

[Moodybrook]

I am still something of a boy racer (albeit geriatric one) so I want to fit a pair of Angel Eyes Spots in the ugly holes on the front of our van. Really just to fill those holes. Don't intend a lot of moonlight flitting !

Question 1. - to have the "Angel"eyes come on with the side lights can I just splice into the side lights cable at the headlamp assembly ?
Question 1 a. Do I have to balance things and do each side separate ?

I have a separate little black box and wiring ("Ring" kit) for the main 55w Spotlights circuit with its dashboard fitting on/off switch.

Question 2. I seem to remember that I may experience a fault to appear, courtesy of something called Canbus or some other mickey mouse circuit systems phenomena. Or am I just paranoid ??

 

[Jaws]

Nothing clever to do at all.. Just wire them in what ever is the easiest way for you

 

[tonyidle]

If they are intended to be DRLs they must come on when the 'ignition' switch is turned on and go off when the sidelights are turned on.

 

[Geo]

Nothing clever to do at all.. Just wire them in what ever is the easiest way for you

 

[Chockswahay]

There was a thread on this a couple of days/weeks ago............. might be worth searching?

^{_{Subscribers  do not see these advertisements}}

 

[Moodybrook]

DRLs

No, not DRLS' thanks, they are really just hole fillers/cosmetic, unlikely to be used in anger. Fog is generally an autumn/winter/spring, hazard, I don't do much bad weather, at least not intentionally. I do intend to do them properly however which is why I was asking for the benefit of your esteemed experience/knowledge.