burstner t660
Free Member
Hi all,
just been on our first trip out, before we left I always do a check on Tyres,engine oil,water etc
then check the heating and water in the van, when it came to checking the water/ pump, the pump
had failed ( not even powering up) I ended up fitting a whale pump from the local Go Outdoors (last one they had )
the original pump was a reich 15l/ min. 1bar the whale pump is a 19l/ min.
Got it all working, but when we arrived on site I put the hot water on the Truma system on and waited for a while then
opened the hot water tap, it spluttered for a bit while forcing all the air out, left the hot tap open for what seemed to be ages
....no hot water, the heating worked fine though.
Also noticed that the toilet flush wasn’t as powerful as previous,but the cold water pressure seemed fine. I’m thinking that
the new whale pump isn’t holding pressure for the hot water tank and the water is running back into the water tank.
Any ideas please.
regards Steve
just been on our first trip out, before we left I always do a check on Tyres,engine oil,water etc
then check the heating and water in the van, when it came to checking the water/ pump, the pump
had failed ( not even powering up) I ended up fitting a whale pump from the local Go Outdoors (last one they had )
the original pump was a reich 15l/ min. 1bar the whale pump is a 19l/ min.
Got it all working, but when we arrived on site I put the hot water on the Truma system on and waited for a while then
opened the hot water tap, it spluttered for a bit while forcing all the air out, left the hot tap open for what seemed to be ages
....no hot water, the heating worked fine though.
Also noticed that the toilet flush wasn’t as powerful as previous,but the cold water pressure seemed fine. I’m thinking that
the new whale pump isn’t holding pressure for the hot water tank and the water is running back into the water tank.
Any ideas please.
regards Steve