We have a 2009 Adria Twin. There is rust appearing behind the sliding door guide channel. To rectify this the guide channel will need to be removed. There are six bolts, approximate position shown in this photo
I can get to two of them through the vent. The others will need the internal furniture removed. I decided to start with the three on the right by removing the internal wall panel. I thought the easiest way would be to remove the top cupboard and then slide the panel out. I have now removed ALL the visible screws and the cupboard is still rock solid.
The box below contains the electrics, batteries etc., so I would prefer not to disassemble this.
I did contact Adria UK some 6 weeks ago for plans / schematics etc., but despite regular chasing they have produced nothing.
Advice from anyone with experience of removing internal furniture from a campervan would be appreciated as I am currently stuck.
I can get to two of them through the vent. The others will need the internal furniture removed. I decided to start with the three on the right by removing the internal wall panel. I thought the easiest way would be to remove the top cupboard and then slide the panel out. I have now removed ALL the visible screws and the cupboard is still rock solid.
The box below contains the electrics, batteries etc., so I would prefer not to disassemble this.
I did contact Adria UK some 6 weeks ago for plans / schematics etc., but despite regular chasing they have produced nothing.
Advice from anyone with experience of removing internal furniture from a campervan would be appreciated as I am currently stuck.