Hymer toilet

Joined
Aug 7, 2022
Posts
2
Likes collected
1
Funster No
90,433
MH
hymer
The toilet in my Hymer will not flush. When you press the button I can hear the pump run but no water comes out and yes I have water in the main tank.
 
Possibly the solenoid valve 12 volt. Allows the water to run around the pan
 
Is the m/h new to you? Has it ever flushed?
Some toilets have their own tank rather than drawing water from the main tank.
 
Are you getting clean water in the compartment the cassette slots into? You may find the pipe work is damaged and water is leaking out before it reaches the bowl, if you do an internet search you should find a page that shows how to fix thetford toilet issues.


Also if you become a full paid up member you can access the resources page, look for trumatic c200 repair and you can download a word document that shows how to remove the bowl so you can check the pipe work and vacuum breaker.
 
Last edited:
Is the m/h new to you? Has it ever flushed?
Some toilets have their own tank rather than drawing water from the main tank.
Had it 6 months it flushed once but other half doesn’t know what he did to make it work

Subscribers  do not see these advertisements

 
Are you sure there isn’t a separate flush tank for the cassette ?
 
Push the button a second time. You may have the Thetford toilet vent fan fitted and that may be the noise you hear, not the water pump. The first push activates the fan and the second push activates the flush.
 
I suspect the problem is the solinoid, when you press the switch it turns on the pump and opens the solinoid.
Open the cassette door and you will see it at the top on the left with the water pipes going to it.
 

Join us or log in to post a reply.

To join in you must be a member of MotorhomeFun

Join MotorhomeFun

Join us, it quick and easy!

Log in

Already a member? Log in here.

Latest journal entries

Back
Top