Hymer Dynamic Line Habitation Door Hinge Excessive Wear (1 Viewer)

[Speve]

Up date folks, they said 3-4 weeks for sample but a couple of weeks ago they had a major tool outage so I expect with the small quantity I want I'm at the bottom of the queue.
Also I'm away for 4 weeks now, with the Fun mobsters at Stratford at the moment.

No worries Lenny just let me know when you have a firm price and I will settle up as soon as you need any funds

 

[Lenny HB]

Update:
Samples on the way to me but unfortunately I'm away until 16th Aug.

 

[Lenny HB]

Back home yesterday and the sample hinges were waiting for me.
Fitted them to a garage door today the material is 0.7mm thinner than the plastic hinges doesn't appear to cause any problems with the fit of the door. The gap between frame and door varies by nearly 3 mm with the standard hinges.
I will try them on the hab door tomorrow.

^{_{Subscribers  do not see these advertisements}}

 

[Just smiffy]

Back home yesterday and the sample hinges were waiting for me.
Fitted them to a garage door today the material is 0.7mm thinner than the plastic hinges doesn't appear to cause any problems with the fit of the door. The gap between frame and door varies by nearly 3 mm with the standard hinges.
I will try them on the hab door tomorrow. View attachment 527903View attachment 527904View attachment 527905View attachment 527906

They look ok but the countersunk could be more uniform…

 

[Lenny HB]

They look ok but the countersunk could be more uniform…

Reflections, they are very good.

 

[CazPaul]

Reflections, they are very good.

Could it cause water ingress issues with the tightness of the door not been as original hinge thickness?

^{_{Subscribers  do not see these advertisements}}

 

[Lenny HB]

Could it cause water ingress issues with the tightness of the door not been as original hinge thickness?

I was looking at having packing plates made to fit behind the hinge but after fitting them the gap around the door is the same. Also there are inner & outer seals.
Can't make them out of thicker material as it would make the knuckle diameter too large.

 

[Speve]

I don’t think .07 mm will be anything to worry about and they will look even better in stainless
well done Lenny it’s progressing nicely

 

[Lenny HB]

I don’t think .07 mm will be anything to worry about and they will look even better in stainless
well done Lenny it’s progressing nicely

0.7 so total of 1.4mm, gap around door was the same after fitting will try on the hab door today.

^{_{Subscribers  do not see these advertisements}}

 

[Lenny HB]

Too windy to fit them to the hab door today.
I have the garage doors a water test with the hose. The door with the standard hinges & the one with the steel hinges results identical. Both has a few drops of water past the first seal, and garage watertight. Looks like the first seal is really just a gap filler to cut down on wind noise the inner seal is the water tight seal.
So all good.

 

[Lenny HB]

Fitted them to the hab door, all good, just waiting for a price on 316 stainless.

People interested so far:-


Qty
6 Speve
2 bellabee
2 Taran_Las
4 grumfy

Please let me know quantities.

 

[Taran_Las]

At the moment, I'm saving up for two.

^{_{Subscribers  do not see these advertisements}}

 

[bellabee]

Two for us, please.

 

[Speve]

I will still take six Lenny can I take it that the hinge pin is also stainless?

 

[Lenny HB]

I will still take six Lenny

Already got you down for that.

^{_{Subscribers  do not see these advertisements}}

 

[Stewart J]

Two please Lenny

 

[Lenny HB]

Updated List:

Qty
6 Speve
2 bellabee
2 Taran_Las
4 grumfy
2 Stewart J
2 Folkranger