Hymer colour

[BusyBuilder]

Is anyone elses Hymer different shades of colour on different panels ?

Ours ranges from a pinky shade through to grey. Although its all as supplied from the factory.

 

[sallylillian]

Substrate differences.

 

[Figaro]

The grey on bumpers and side panels differs on mine. Have to look hard to tell though.
Life's too short to worry about to it, just enjoy it

 

[Tykatem]

So is mine, it's meant to! The colour on our front and skirt panels is Champagne.

Pete

 

[BusyBuilder]

This picture shows it better, not worried, but thought who ever at Hymer is in charge should have rectified it, if it was a car, it would be unacceptable.

^{_{Subscribers  do not see these advertisements}}

 

[mike mcglynn]

I had a Vauxhall cavalier just like that but you could only tell under sodium lighting.

 

[BobtheBass]

Mine is so dirty I can't tell what colour/s it is. Problem solved!

 

[Khizzie]

This picture shows it better, not worried, but thought who ever at Hymer is in charge should have rectified it, if it was a car, it would be unacceptable.View attachment 224220

That's quality. You wont get that on a cheap British van. Lol

 

[Speve]

The GRP gel coat fades over time ours is a white van and the front is now off white.

 

[Tykatem]

This picture shows it better, not worried, but thought who ever at Hymer is in charge should have rectified it

LOL The colour combination you have is an extra and would have been requested/specified by the original customer.
Take a look at the various colour combinations in the link below. You'll find there's a few with the same colour as yours.
Broken Link Removed

Pete

^{_{Subscribers  do not see these advertisements}}

 

[BusyBuilder]

I read somewhere that it adds weight too something like 20kg ?

 

[Pausim]

At least Hymer tell you what the additional weight of a metallic finish will be. You can add this to the weights given for all the extras and work out how much of the original payload you have left for use. Some manufacturers quote a payload but hide how much the extras weigh, perhaps because the useable payload is actually two thirds of three fifths of s_d all.

 

[Khizzie]

At least Hymer tell you what the additional weight of a metallic finish will be. You can add this to the weights given for all the extras and work out how much of the original payload you have left for use. Some manufacturers quote a payload but hide how much the extras weigh, perhaps because the useable payload is actually two thirds of three fifths of s_d all.

You have to laugh so many excuses for poor quality finish.. Love this site.