I've been lurking for some time enjoying the useful info from this forum. We are a family of 5 and only use sites without ehu. I have 6 year old solar setup of Bosch 150w mono panel, cheap Chinese mppt controller and 2 x 110ah leisure batteries. We are enjoying nice weather on our 2nd week away, however I'm having problems.
The voltage dropped to below 12v a few nights ago and is slowly returning to 12.7v. Normally when the battery is charging I would see voltages of maybe 13.8, but this time the voltage is just slowly rising from 12v in the morning to maybe 12.7 at night. The display is showing 25 - 30 Watts most of the day with the odd high of maybe 55 in direct sun. Therefore I'm thinking the controller is just working like pwm. I always keep an eye on the controller and normally the volts would be over 13 on overcast days. We have had to limit the WiFi, ipads, phones, etc so as not to use too much battery.
I am thinking of first changing to a Victron SMART BlueSolar Charge Controller - 100/20a so that I can upgrade my solar panel at a later date. I like the reviews and that I can monitor voltages on my phone. Would I be better off with a smaller controller and then when I add a 2nd panel I could add a 2nd controller. Maybe I should go for the bigger controller and then buy 2 new panels eventually?
. The 150w can struggle later in the year when we have less sunlight.
I realise I have waffled a bit here but any advice would be appreciated.
Andrew
The voltage dropped to below 12v a few nights ago and is slowly returning to 12.7v. Normally when the battery is charging I would see voltages of maybe 13.8, but this time the voltage is just slowly rising from 12v in the morning to maybe 12.7 at night. The display is showing 25 - 30 Watts most of the day with the odd high of maybe 55 in direct sun. Therefore I'm thinking the controller is just working like pwm. I always keep an eye on the controller and normally the volts would be over 13 on overcast days. We have had to limit the WiFi, ipads, phones, etc so as not to use too much battery.
I am thinking of first changing to a Victron SMART BlueSolar Charge Controller - 100/20a so that I can upgrade my solar panel at a later date. I like the reviews and that I can monitor voltages on my phone. Would I be better off with a smaller controller and then when I add a 2nd panel I could add a 2nd controller. Maybe I should go for the bigger controller and then buy 2 new panels eventually?

I realise I have waffled a bit here but any advice would be appreciated.
Andrew