Help with diagnostic problem on 3 litre flair diesel 05-06 Iveco

[sillybug]

Have just bought cable 38 pin which doesn’t fit bought another from different supplier just in case but that doesn’t fit .
Look as if it should fit but doesn’t and am now told there are probably several different fittings wondered if anybody could help
as can’t find fault .
Thankyou

 

[gus-lopez]

Doesn't a normal obd reader fit?

 

[Phill D]

The obd plug in is standard but most Fiat and I guess it could include iveco require a specific to year / model plugged in to access the data.
They have different pin configuration although they will all plug in.

 

[Steve and Denise]

JockandRita did you find the correct one ?

 

[sillybug]

No can’t find correct one have got 3 now and all seem to be really close but just won’t push in don’t really no what else to do

^{_{Subscribers  do not see these advertisements}}

 

[sillybug]

I think best thing might be to see if Martin comes along and has any ideas he really is great with things on the flair he has helped us so many times in the past so here’s hoping

 

[Phill D]

90No can’t find correct one have got 3 now and all seem to be really close but just won’t push in don’t really no what else to do

If its an obd plug I had the same issue just would not plug in.
I found that by removing the protruding piece of the plug that made the pkug in more flexible a d went straight on.
Poor injection moulding.

 

[sillybug]

Have already tried that but I was being very careful so may go and have another go at that perhaps I only need a little bit more off thankyou

 

[JockandRita]

JockandRita did you find the correct one ?

No, not yet Steve. TBH, I got side tracked when searching for the right one or adapter.

Cheers,

Jock.

 

[jongood]

I think best thing might be to see if Martin comes along and has any ideas he really is great with things on the flair he has helped us so many times in the past so here’s hoping

Probably help if you tagged him? funflair

^{_{Subscribers  do not see these advertisements}}

 

[sillybug]

I may have to but I seem to always be calling on him for help so going to get whoever we have breakdown cover with in the morning see what they can do then if they no help will ask funflair just don’t like to bother him to much .
See what happens tomorrow but Thankyou every body really appreciated .

 

[funflair]

I may have to but I seem to always be calling on him for help so going to get whoever we have breakdown cover with in the morning see what they can do then if they no help will ask funflair just don’t like to bother him to much .
See what happens tomorrow but Thankyou every body really appreciated .

I'm here but no help as usual, I know where the plug is but that's as far as my pay grade takes me.

A quick google shows me this quote, "This vehicle use a non standardized round OBD socket"

and I found this, https://www.ebay.co.uk/itm/26211495...d=link&campid=5338547443&toolid=20001&mkevt=1 but it sounds like you have got that far already.

 

[sillybug]

Thanks Martin will have to try another avenue this time and let the moths out of my pocket hey hoe .
Thankyou all for your help