injebreck99
Free Member
Hi all, just trying to find out the proceedure for adapting the headlamp beams to LHD for my newly aquired 2009 Fiat Ducato M/H please. Planning a trip abroad later this year.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Subscribers do not see these advertisements
Hi all, just trying to find out the proceedure for adapting the headlamp beams to LHD for my newly aquired 2009 Fiat Ducato M/H please. Planning a trip abroad later this year.
Subscribers do not see these advertisements
These are dearer but do a far better job , and you can re-use Link Removed
Subscribers do not see these advertisements
If you dont drive at night do you have to have then as we will only be driving in the day time
Subscribers do not see these advertisements
I have been abraod a number of times with my land rover and have never fitted them. Never had any probs.
Safe travels
I have been abraod a number of times with my land rover and have never fitted them. Never had any probs.
Safe travels
Subscribers do not see these advertisements
I have used the stick on adjusters on the m/homes and our car and never had a problem removing them - yet!
You might not have had any problems, but what about people coming towards you?
Subscribers do not see these advertisements
Very trueI don't take mine off? Still passed mot ok
I use methylated spirits or deicer to remove the adhesive from beam deflectors on polycarbonate headlight lenses. It takes a while but does not damage the lense.
Subscribers do not see these advertisements
I don't take mine off? Still passed mot ok
On Amazon @ £2.79 inclusive of delivery.
Never used them , but they look to be a single use product . Possibly a decent grade of clear double sided sticky tape would allow multiple use.
=====
Our MH is the fiat ducato base (2008 ). Anyone know if the standard headlamp units on that base have the internal screw adjustment / lever adjustment fitting which allows for physical adjustment of the beam to LHD settings ? So doing away with the need for bits of plastic being stuck to the cover ? Handbook for the base doesn"t mention and I wouldnt be too sure what to look for under the bonnet.
Subscribers do not see these advertisements
Subscribers do not see these advertisements
You never see Johnny foreigner with his fitted when he visits Blighty!
We have a set, they are in the glovebox!:thumb:
Subscribers do not see these advertisements