GAS BTLE LOCKER FRAME COVERING

Joined
Jul 31, 2019
Posts
990
Likes collected
9,259
Location
Devon
Funster No
62,885
MH
Swift Bessecar 584
Exp
Since April 2019
Any ideas where to this grey protective strip which covers underside side of locker. Photos attached.
Thanks in advance.
IMG_20211105_115329.jpg
IMG_20211105_115356.jpg
 
It looks a bit like the GRP edging they're using on our roof maybe a bit of that cut down.
 
Looks like the 6mm thick under laminate flooring foam insulation that I bought from Wickes.

View attachment 554400
I don't think that would resist weather very well. But strangely enough I was just looking at that last week I've used the green fibrous stuff before and about to lay a pretty big floor soon how was the grey stuff.
 
I don't think that would resist weather very well. But strangely enough I was just looking at that last week I've used the green fibrous stuff before and about to lay a pretty big floor soon how was the grey stuff.

I put down a new laminate wood plank effect floor covering in the PVC we had a few years back and I used this insulation under the 6mm plywood to give the flooring a softer feel.
I was okay in the van, but that's the only experience I have of it.
 
I don't think that would resist weather very well. But strangely enough I was just looking at that last week I've used the green fibrous stuff before and about to lay a pretty big floor soon how was the grey stuff.
I’ve used loads of it over the years when I was working used to lay laminate flooring for customers a lot on my jobs and never had any problems with it😊
 
Thanks for your replies, will call in at Wickes next time I'm near there.
 

Join us or log in to post a reply.

To join in you must be a member of MotorhomeFun

Join MotorhomeFun

Join us, it quick and easy!

Log in

Already a member? Log in here.

Latest journal entries

Back
Top