Fridge gas jet block

[bigalw35]

Hi peeps, I’ve got the 2001 Mercedes Hymer B680 RHD 2.1 diesel, I tried to ignite the fridge, no go, so I removed the gas jet, it would appear the someone has had “a go at it” and buggered the jet. First can anyone tell me what the jet is (size) and where they be obtained TIA, Alan

 

[Figaro]

You don't say what make of fridge but I'd try leisureshopdirect

 

[Landy Andy]

The jet will have a number on it that will indicate what it should be.

 

[bigalw35]

You don't say what make of fridge but I'd try leisureshopdirect

Hi figaro, it’s a dometic fridge works perfectly on mains and 12v, but won’t ignite on gas

 

[Basildog]

Hi peeps, I’ve got the 2001 Mercedes Hymer B680 RHD 2.1 diesel, I tried to ignite the fridge, no go, so I removed the gas jet, it would appear the someone has had “a go at it” and buggered the jet. First can anyone tell me what the jet is (size) and where they be obtained TIA, Alan

You need to know the exact make and model of your appliance but more importantly the original operating pressure as it is an older German van it could well be operating on 50 mbar gas pressure but if it was for the French market it could be on 37 mbar , alternatively the original appliance may have been changed and it could be 30 mbar .

^{_{Subscribers  do not see these advertisements}}

 

[bigalw35]

I'm an retired electrician not a gas fitter, so the attached is a little bit double dutch to me, assistance required please, TIA

 

[Manic]

On my Hymer I can access the fridge burner by removing the bottom vent and I have to remove the frame as well and then remove burner cover.
Then undo gas pipe , having turned of fridge gas valve , the jet is held in by the gas pipe, remove burner and blow that out also.
Don’t use any tools on jet just blow it out as it’s only thin metal.
Red arrow, screw to remove burner
Green arrow, gas pipe holding jet

 

[bigalw35]

On my Hymer I can access the fridge burner by removing the bottom vent and I have to remove the frame as well and then remove burner cover.
Then undo gas pipe , having turned of fridge gas valve , the jet is held in by the gas pipe, remove burner and blow that out also.
Don’t use any tools on jet just blow it out as it’s only thin metal.
Red arrow, screw to remove burner
Green arrow, gas pipe holding jet
View attachment 862573View attachment 862574

cheers Manic, I cant actually get to that cover at the moment to check it, but I'll be moving the moho shortly, I'll check it then, many thanks