Fresh, Grey and LPG tank levels (1 Viewer)

[Two on Tour]

I fitted Mopeka bluetooth tank sensors a few weeks back and finally today I got around to setting these up to read out on our Victron system.

 

[Guigsy]

How are these connected? Does the Victron (GX?) support the sensors via bluetooth natively? Via a gateway? Or are you using some other shenanigans?

My waste tank already sits stupidly low to the ground. Pretty sure I'd knock off a sensor mounted to the bottom on the first road hump.

 

[Two on Tour]

How are these connected? Does the Victron (GX?) support the sensors via bluetooth natively? Via a gateway? Or are you using some other shenanigans?

My waste tank already sits stupidly low to the ground. Pretty sure I'd knock off a sensor mounted to the bottom on the first road hump.

Victron's Venus 2.90 > now supports Mopeka Bluetooth sensors via Kevin Windrem's GuiMods which adds a host of other system info as well as support for the Mopeka tank levels.
At present, I'm running Venus 2.91 on a RasPi, but if your GX device like the Cerbo supports Bluetooth, then you should be able to use the Mopeka tank sensors.

The Mopeka tank sensors are only 8mm thick, so will not reduce your ground clearance by much.
They attach to your tank by magnets if you have a steel tank or with the included holder that you stick to the bottom of plastic tanks and the like.