Dometic 7655 fridge not working

[tinaandian]

Can any of you fellow moho owners tell us where the relay is positioned for the above fridge as ours isn't working, no lights, nothing. We have an Aviano 684i 2007, just had a full EBL99 overhaul and update. We would welcome any advice please. Have checked all fuses, tried resetting EBL99. Checked loop between block 1 and block 2 on EBL99. All other appliances are working. Thank you.

 

[Captain Yoghurtpot]

.

 

[Lenny HB]

<Broken link removed>
Goooooooooooooooooood Evening FunsterMunchkins from a very happy Yoghurtpot Towers, where, courtesy of a very kind Funster , I am now the owner of an almost new 105amp leisure battery and a brand new battery box to put it in, and for an exceptionally good price.
Met and collected today and looking to replace current battery with this one and use ours, which has dubious storage capacity, as a spare linked to an external portable solar panel.
Hope all well and content with current situations and hope anyone not so chipper gets better soonest.
Nice to hear Peterborough was a success and that so many seem to have had a good time.
Right, will now have to think about retiring to bed as have a busy day at the parental estate tidying the garden and cutting the lawns of the ancestral pile.
No rest for the wicked, but I am losing weight with so much exercise, so somethings going right.
Until Tomorrow, I wish you all a very good night and sleep well.

Toodles

Funny looking fridge.

 

[Lenny HB]

Often a seperate fuse block beside the Elektroblock with a couple of 2amp & 10 fuses one of the 2amp ones feeds the fridge electronics, that's how Hymer do it.

 

[Captain Yoghurtpot]

Funny looking fridge.

Sorry folks, meant to be in the Morning Thread.
Deleted and will try tomorrow when less tired

^{_{Subscribers  do not see these advertisements}}

 

[autorouter]

Can any of you fellow moho owners tell us where the relay is positioned for the above fridge as ours isn't working, no lights, nothing. We have an Aviano 684i 2007, just had a full EBL99 overhaul and update. We would welcome any advice please. Have checked all fuses, tried resetting EBL99. Checked loop between block 1 and block 2 on EBL99. All other appliances are working. Thank you.

There are two entirely separate 12V supplies to the fridge. The high current supply goes to the fridge 12V element only. It comes from the alternator/starter battery, via a 20A fuse near the starter battery, in through Block 2, the fridge relay, and out through Block 1 to the fridge.

The low current supply comes from the leisure battery, through one of the fuses in the EBL, to the fridge control board, also the lights and igniter, gas valve control etc. That's the circuit that it seems is not working. It doesn't have a relay in that circuit. I think it's one of the circuits labelled Kreis 1 or Kreis 2. Has the fridge worked at all since the EBL overhaul?

The HC and LC supplies usually go to a terminal block at the back lower part of the fridge. It is usually accessible by removing the lower external vent. Usually the HC wires are noticeably thicker than the LC wires.