SOLD Alko Chassis Mounted Bike Rack

[Rob Turner]

As the title says, it’s a 3 bike foldable chassis mounted rack.
Fits Alko low profile AMC chassis.
These are £1500 fitted and are a very good rack.
Need it gone, offers over £250.

 

[StitchesnFluff]

Good height from the ground

 

[Rob Turner]

Bump

 

[Lanerboy]

Rob do you know if this type of rack puts a lot more load on the rear axle I ask as I am thinking of getting a twist and go type scooter to put in my garage then have the ebikes on this type of rack but I am worried I will overload the rear axle.

 

[tonyidle]

Rob do you know if this type of rack puts a lot more load on the rear axle I ask as I am thinking of getting a twist and go type scooter to put in my garage then have the ebikes on this type of rack but I am worried I will overload the rear axle.

Anything carried behind the rear axle has the same effect: the load the rear axle is increased and the load on the front decreased by an amount dependant on the weight of the object and its distance behind the rear axle. There's an online calculator somewhere.

^{_{Subscribers  do not see these advertisements}}

 

[tonka]

Rob.
Do you have any pics to show how it mounts to the chassis.
Not sure if mine is the low profile AMC you mention.
Mine is Alko but has a towbar already in place, unsure it It will fit in place or even both together.

 

[Rob Turner]

 

[Happy1]

Hi Rob, presumably the galvanised bit cut off at an angle bolts direct to black chassis boot extension?
I have same set up would you be able to quote dimensions for bracket and mounting holes and I can see if a match?

 

[Rob Turner]

The bolt holes on the chassis from the angle bit are 140mm centre to centre and the one on its own is 195mm from the centre of the middle bolt if that makes sense. Your chassis should be 1300mm wide.

Hope this helps

Rob

 

[Rob Turner]

Bump

^{_{Subscribers  do not see these advertisements}}