Adusting A Class Wiper Jets (1 Viewer)

[clanjones]

I want to adjust the washer jets which are attached to the wipers but can't find any information on how to do this. Can anyone enlighten me please!

 

[Lorryman100]

I stuck a sewing needle into the jet and moved/wiggled it to a better position.

 

[Lenny HB]

The plastic block that the pipe connects to should have 2 or 4 jets in it the same as car washers just stick a pin into them and adjust.

^{_{Subscribers  do not see these advertisements}}

 

[clanjones]

Cheers guys only has 2 jets and coverage is pants just now, I'll give it a go next week before we head off. Hope I am not tempting rain as the summer in Scotland in the east anyway, has been awful this year!

 

[bigtwin]

Cheers guys only has 2 jets and coverage is pants just now, I'll give it a go next week before we head off.

Are you sure the issue is the jets? Are you confident that the pump is providing enough pressure/flow?

Ian

 

[Lenny HB]

Looking at your avita I still have a Laser sitting in the back garden.

^{_{Subscribers  do not see these advertisements}}

 

[clanjones]

Are you sure the issue is the jets? Are you confident that the pump is providing enough pressure/flow

Yep loads of pressure just needs directed in the right place!

 

[clanjones]

Looking at your avita I still have a Laser sitting in the back garden.

We started sailing in a laser 2 and then moved up to the RS 200. I should change the avatar to something with a Tandem in it, which seems to have taken over, as we have only sailed 3 times this year!

 

[Lenny HB]

My Laser has been sitting there unused for about 5 years, I was treasurer of the local club for 20 years.

^{_{Subscribers  do not see these advertisements}}

 

[peterc10]

To get back to the question, the answer will probably depend upon what make and model A class you have. The washers on them are not all the same. Best to state this then maybe somebody with the same van will answer.

 

[Mr Chrysalis]

Looking at your photo, mine are the other way up to yours, and work well I don't know if that would make a difference.