Which panels for a Burstner Ixeo Time? (1 Viewer)

[ChaosToo]

So, I've searched but not found an answer (apologies in advance if there is a thread about it).

My MH doesn't have a great deal of 'flat' space (Ixeo Time 586), so a typical install seems difficult, if not impossible - but what about the flexible panels? Would it be possible to fit them to the 'hump' on the roof?

If not, any suggestions as to where I can fit 1 or 2?

 

[ChaosToo]

Anyone? I'm really clueless on this and would appreciate advice ....

 

[Hellski]

Is it possible to take a picture of your roof to give folk an idea of space available?

I believe you have a similar hump in the roof to my 680g but a much shorter flat area?

^{_{Subscribers  do not see these advertisements}}

 

[ChaosToo]

Bit dark at the moment. Will get on it at the weekend

 

[hilldweller]

You might be just the person to use the flexible panels.

 

[Stealaway]

If not, any suggestions as to where I can fit 1 or 2?

Any that will fit the gaps - 2 x 125W

Mine were just a fit but they make it difficult to clean the roof now I can't get out the roof light.

^{_{Subscribers  do not see these advertisements}}

 

[Alcemi]

@ChaosToo we have similar roof constraints on our Ixeo Time 590 (same size I think) and have fitted an 80w Flexi panel to our "hump" with no issues on size, could probably have gone larger if we wanted to.

HTH

 

[Freespirit1]

So, I've searched but not found an answer (apologies in advance if there is a thread about it).

My MH doesn't have a great deal of 'flat' space (Ixeo Time 586), so a typical install seems difficult, if not impossible - but what about the flexible panels? Would it be possible to fit them to the 'hump' on the roof?

If not, any suggestions as to where I can fit 1 or 2?

Yes - flexible CIGS panels are the obvious choice both in size and superior technical abilities and yes they are likely to fit well on the bump.

https://mipvsolarpanels.co.uk/

Have a look - I also have a discount code I can give you if you PM me

 

[Freespirit1]

@ChaosToo we have similar roof constraints on our Ixeo Time 590 (same size I think) and have fitted an 80w Flexi panel to our "hump" with no issues on size, could probably have gone larger if we wanted to.

HTH

Those panels are semi- flexible ones and not to be confused with true flexible panels that I have given the link to. They also look like mono or polycrystalline which are prone to hairline cracking as the crystals can not actually be bent.

^{_{Subscribers  do not see these advertisements}}