Vinyl blister

[Trout bum]

Noticed a small blister on the black vinyl on the van when gently pressed it feels like there's water behind it question is do I burst it with a pin and try and get the water out or is there a trick for getting the water out and sealing the blister to stop it filling up again , any advice would be welcomed

 

[Vipar]

Gently warm it if it’s near an edge use a credit card to move the water to the edge of the vynal if it is air I don’t know

 

[movan]

Do you have a photo please? People can usually help better if they can see the problem.

 

[Trout bum]

Hi will get a pic on of the blister shortly tried heat gun and a plastic card to try and flatten it water came out a small hole as I was pressing it so will need to try and seal the hole once it's dried out don't know how

 

[GMLS]

I had one of those on our AT. Just popped it with a pin and it flattened down nicely. No water just air and no idea why it just appeared

^{_{Subscribers  do not see these advertisements}}

 

[Mikeco]

A pin should do the trick.

 

[Trout bum]

Hi done the same with a pin can squeeze the water out but when it rains it just fills back up again need to try something else

 

[DerryW]

Its not to the left of the door when looking at it by any chance, about the size of a 5p. I have the same

 

[Trout bum]

Hi Derry
It's on the passenger side just on the seam just after the door where the body widens out keeps filling up with water even after popping it and flattening it .

 

[DerryW]

Attached is an image I took this morning. When the weather warns up (in the spring now) I'll give the card trick ago. I don't want to tackle it now as it feels quite brittle, and don't want to risk cracking the vinyl graphic.

^{_{Subscribers  do not see these advertisements}}