turbo boost sensor

[aarmstrong89]

I have a fiat ducato 2.3 2018 motorhome
I recently kept getting light on and going in to limp mode I scanned the fault code and it was p0238 which points towards the turbo sensor fault (map sensor ) now this is where I have a problem I can't find it anywhere I've found the solinoid sensor and all my vacuum pipes are perfect when I clear this fault it doesn't come back on for a while but really want to either clean or change this turbo sensor I've followed every pipe from the intake side also looked from underneath the engine and I'm really stuck any ideas exactly where it is ? Many thanks in advance

 

[Landy Andy]

Isn’t the MAP sensor on the inlet manifold? MAP=Manifold Absolute Pressure

On my older Ducato it is behind the throttle body, on the top of inlet manifold, and a bit of a pig to get to.

 

[aarmstrong89]

Isn’t the MAP sensor on the inlet manifold? MAP=Manifold Absolute Pressure

On my older Ducato it is behind the throttle body, on the top of inlet manifold, and a bit of a pig to get to.

Many thanks for the reply I've no idea where mine is I can't find it looked behind the throttle body I thought if I could see any wires I could trace it but nope can't even find any pictures of it in situ on the Web cheers

 

[Landy Andy]

On mine it is hidden, and right under the glow plug for cylinder 3 (I think).

Mine. Sorry only photo I have

 

[Carpmart]

I’ve no experience with this engine to advise specifically but you need to be looking along the cold side boost pipe (after intercooler) and up around the inlet manifold… until you find it!

^{_{Subscribers  do not see these advertisements}}

 

[Landy Andy]

Internet pics, so may be different, although all show inlet manifold.