Running cables in Adria Twin Supreme

[colinic]

Any tips or photos on how to run cables in the Adria Twin please. We have the 600 Supreme 2021 model.

For instance, how do you get into the blanked off small cupboard next to where the TV goes above the twin passenger seat? There is a mains socket and twin USB ports on the underside. Do I just keep pulling until it pops off or is there a secret screw?

Same with cable runs in the upper cupboards above the bed?

I want to add some more USB sockets.

 

[Andy MacD]

Don’t know about the front so interested in answers.

Does the 600 have wall units above the back door?

I have a 640 SLB and put in additional 12v socket and USB. If it’s the same as mine you can pop off the plastic cover on the existing USB port and undo 4 screws to drop it. Take off the plastic cover on the inside of the wall unit on both sides. You can then take a spur from the existing USB, thread it through behind the wall cabinets at the back to the other side and install either a fused 12v or fused USB. I then ran another wire through the offside cabinets to install another USB at the cab side of the bed.

Can do photos if it helps.

 

[SD j]

it’s accessed by removing screws in the first cupboard and removing the divider between them if that makes any sense at all.
there are all the 12v and 240v connections within, its easy from there to thread down to behind the bench seat.
Its fiddly to get the false door off , I replaced the L shaped metal brackets with magnetic cupboard door latches in order to make it easier to access In future.

 

[SD j]

The rear 12v USB socket is fairly straightforward,
it was easy enough to spur into the feed behind the existing 12v USB socket on the passenger side then run a cable behind the over door cupboards , I fished the wire behind the over door cupboards in some flexi plastic sheathing to the other side making use of the cutouts in the top of the cupboards (Inside cupboard see pic)
There are plastic shrouds in each cupboard above the reading lights, remove these (4screws) and you will see the wiring.


I also added a 240V socket under the rear travelling seat directly from the fuse box as there are plenty of spare ways in the box.
Fitting a 240v socket in the rear somewhere looks a real mare so ive not got my head around it yet , hopefully someone will do it first and post up

 

[ED O'DARAC]

A very long, slim Phillips screwdriver can be inserted through a blanking plate then undo the silly L brackets. I used industrial Velcro instead of the L brackets to secure the panel.

^{_{Subscribers  do not see these advertisements}}

 

[royandsharont]

All sounds good but I was once told that in a MH you could not run extra sockets as a spur off an existing one. I never clarified if that was for 240v or others or all? Perhaps someone will know for sure. I also understood you needed to use stranded cables as opposed to solid copper ones as the vibration associated with a vehicle makes the solid ones, as used in houses, prone to fracturing?
Regards
Roy

 

[Andy MacD]

Re12v cables I got automotive cable from Halfords. Although I took spur from existing 12v socket I’m not going to be using them both at the same time. Not done the 240v socket yet but that will be wired to the 240v fuse box unit as per SD j above.

 

[Ian Bosman]

Any tips or photos on how to run cables in the Adria Twin please. We have the 600 Supreme 2021 model.

For instance, how do you get into the blanked off small cupboard next to where the TV goes above the twin passenger seat? There is a mains socket and twin USB ports on the underside. Do I just keep pulling until it pops off or is there a secret screw?

Same with cable runs in the upper cupboards above the bed?

I want to add some more USB sockets.

Buy an electricians snake for pulling through cables in very confined spaces.