Project 2000 automatic step

[StitchesnFluff]

Our project 2000 step on the drivers door (Hymer B598 2016) has started to act strangely.

After either opening or closing the door it goes in or out completely but then jerks. For example on closing it will shut in correctly and then move slightly 3 or 4 times before becoming completely stationary.
Any ideas, anyone?
Thanks
All the best
Nick

 

[SandraL]

Is it a single folding step? If so there is a limit switch that tells it that it has fully closed. It is incentre of step, best viewed from underneath when step is extended.
Ours was same as car door courtesy light switch from, i think, fiat panda. Am sure there is a thread about it somewhere.

 

[SandraL]

Electric step failure

hi all We have a 2012 Hymer with a Project 2000 factory fitted electric step. The step will return with no problems on the switch but it won't extend out on it. I can pull the step out manually without any real effort so it's not jammed but it just will notnextend out on the switch. I have...

www.motorhomefun.co.uk

May be some help

 

[Steve and Denise]

Try a bit of wD40 on the pivots it worked on mine

 

[StitchesnFluff]

Wd40 works okay now! Will sort proper at home....thank you

^{_{Subscribers  do not see these advertisements}}